Accepted WAN/LAN auto-sensing
Background:
There is a typical network topology:
Some users might notice that, once the internet service fails, they are no longer able to access the NAS server from the local network.
The cause of this Phenomenon:
When internet service went down and the cable modem failed to provide an IP address for Main Deco, both Ethernet ports on the main Deco would work as WAN ports to detect internet connection. NAS would no longer obtain an IP address from Deco.
Why do we use WAN/LAN auto-sensing on Deco?
For the Deco Mesh system, normally, it would have more than 2 units, and each unit has at least 2 Ethernet ports; It would be time-consuming and confusing to find out which port should be connected to the ISP modem. And supposing that the WAN port is fixed, once this port is broken, the whole Mesh kit would be useless.
Recommended Solutions:
- Given that the issue arises only when the ISP modem fails to assign an IP address for the main Deco, once the cable modem recovers, the problem should be resolved. It is suggested to contact the ISP to restore the modem connection as a priority.
- The current workaround would be connecting the wired servers to the satellite Deco units instead of the main one.
- And we have also implemented enhancements on certain models, ensuring that the WAN port remains constant as long as the physical Ethernet connection between the modem and main Deco is unchanged, even when there is no internet service from the modem. Moreover, it is also planned to support manually fixing a specific Ethernet port as the WAN post on the Deco APP later.
The following models already support fixing the WAN port:
Deco X80-5G Deco X50-5G Deco X20-4G Deco X50/X55_V1/V1.2 Deco X20/X60_V4 Deco X60_V3/3.2/V4.2 |
1.11.0 Firmware Platform Understand the Differences Among Deco Firmware Platforms
|