How to Do Port Forwarding on AX73 To allow Multiple desktop
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to Do Port Forwarding on AX73 To allow Multiple Desktop on the Same static WAN IP to be able to remote desktop
I did add 3389 for the IP's and able to take remote of that desktop, but when i add another IP address on same port, it gave address conflict
I did try to add 3388 for the other desktop but was not able to take remote
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I think it should work with the setup you show in your picture.
In the Windows Remote Desktop Connection Client's "Computer" field you entered the IP address in the format x.x.x.x:3388, right?
- Copy Link
- Report Inappropriate Content
I think it should work with the setup you show in your picture.
In the Windows Remote Desktop Connection Client's "Computer" field you entered the IP address in the format x.x.x.x:3388, right?
- Copy Link
- Report Inappropriate Content
In general changing ony external port and keep internal to 3389 should work - TCP protocol only is enough for RDP.
If that doesn't work you can change the default remote desktop port for any additional windows system you want to control remotely - here's how.
Then use normal port-forward for any machine with changed port.
Check the embedded windows firewall and make sure the RDP ports (default/modified) are opened.
- Copy Link
- Report Inappropriate Content
woozle wrote
I think it should work with the setup you show in your picture.
In the Windows Remote Desktop Connection Client's "Computer" field you entered the IP address in the format x.x.x.x:3388, right?
thanks for helping, i was using format x.x.x.x:3388 but in gateway instead of the the PC address. After i entered the IP address in the format x.x.x.x:3388 it worked like a charm, now i can use both the desktops over the internet.
this proves half knowledge is of no use. thanks for guidance.
- Copy Link
- Report Inappropriate Content
terziyski wrote
In general changing ony external port and keep internal to 3389 should work - TCP protocol only is enough for RDP.
If that doesn't work you can change the default remote desktop port for any additional windows system you want to control remotely - here's how.
Then use normal port-forward for any machine with changed port.
Check the embedded windows firewall and make sure the RDP ports (default/modified) are opened.
i had done this part (https://docs.microsoft.com/en-us/windows-server/remote/remote-desktop-services/clients/change-listening-port) which u shared earlier and this is god for those who don't know about this.
Thanks for guidance, my issue stands resolved.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2258
Replies: 4
Voters 0
No one has voted for it yet.