Disconnection issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Disconnection issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Disconnection issue
Disconnection issue
2021-07-15 07:21:27
Model: Archer C20  
Hardware Version: V4
Firmware Version:

I connected a repeater to my router archer c20. Very frequently an issue is happening & this scenario happens after using repeater for 2 to 3 minutes , the repeater got disconnected from the router and stopped showing up and as to make it correct i have to restart repeater several time. I think the real problem is with router, because i observed while using several devices simultaneously the router got disconnected from all the device and after 2-3 seconds it reconnects itself with all the other devices (this scenario also happens once or twice a day). I tried

1. different ip spaces so that they 192.168.0.101 to 192.168.0.149 for router and 192.168.0.162 to 192.168.0.199

2. address reservation for repeater in dhcp client list. ( 192.168.0.148) even i tried changing it .

3. tried installing several firmware update (latest archer v4 181213 update dt 29-1-2019 )

 

few things to know 

when using my laptop directly with the router no disconnection issue

no problem in my repeater because i have checked it throughly while using alone.

 

I am currently fed up with problem and cannot find a solution to this problem. Pls help if anybody can ?

I think it could  a algorithm issue with the tp link or may be some kind of problem in router setting. I confirmed it with several friends and they tell me its a issue which is persistent in tp link routers.

  0      
  0      
#1
Options
1 Reply
Re:Disconnection issue
2021-07-15 09:20:17 - last edited 2021-07-15 09:21:20

@Ankit_009 

 

Did you have these disconnect before installing the repeater ? What's the repeater make and model ?

You can try to re-arrange the IP address space to see if that will improve things.

For example:

Router IP address: 192.168.0.1 / DHCP server: 192.168.0.2 - 192.168.0.100

Repeater IP address: (static IP) 192.168.0.254 / DHCP server OFF (all DHCP requests could be served by the router)

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options