Home Network Community > Wi-Fi Routers > WAN disconnect 2 hours after router boot
< Wi-Fi Routers

WAN disconnect 2 hours after router boot

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WAN disconnect 2 hours after router boot

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WAN disconnect 2 hours after router boot
WAN disconnect 2 hours after router boot
2021-06-14 15:28:55
Model: Archer AX20  
Hardware Version: V1
Firmware Version: 1.3.0 Build 20210318 rel.47238(4555)

HI 

The problem with the disconnection of the WAN connection continues. 
Exactly 2 hours after restarting the router, the WAN port lights up in orange and on the Internet status of the admin web page of the router it says Weak connection. 
Remove and after 3-4 seconds puts it back, the router reconnects and so can work for days until the next restart. When the same thing happens again. 
Don't tell me that I shouldn't restart, because it's like wanting the power supply not to stop in Bulgaria :) The store refuses to return my money because they think the problem is not in the router. But I put another router, another manufacturer and this problem does not exist. Even with 450M Wireless N Gigabit Router Model No. TL-WR1043ND has no problems.
I am sending you a log file, pay attention to: WAN1_ON and WAN1_OFF
Please tell me what the router does exactly 2 hours after start! I have set the activity time for DHCP addresses to 60 min.
 
2021-06-14 10:54:44 led-controller[1091]: <6> 288051 Start to run WAN1_ON
2021-06-14 10:54:44 led-controller[1091]: <6> 288051 Start to run WAN0_OFF
2021-06-14 10:54:44 led-controller[1091]: <6> 288051 Start to run LAN_ON
2021-06-14 10:54:43 nat[14974]: <6> 211501 Initialization succeeded
2021-06-14 10:54:43 nat[14974]: <6> 211501 Initialization succeeded
2021-06-14 10:54:36 led-controller[1091]: <6> 288051 Start to run WAN1_OFF
2021-06-14 10:54:36 led-controller[1091]: <6> 288051 Start to run WAN0_ON
2021-06-14 10:54:36 led-controller[1091]: <6> 288051 Start to run LAN_ON
2021-06-14 10:54:31 nat[13893]: <6> 211501 Initialization succeeded
2021-06-14 10:54:31 led-controller[1091]: <6> 288051 Start to run WAN1_OFF
2021-06-14 10:54:31 led-controller[1091]: <6> 288051 Start to run WAN0_OFF
2021-06-14 10:54:31 led-controller[1091]: <6> 288051 Start to run LAN_ON
2021-06-14 10:54:31 nat[13893]: <6> 211501 Initialization succeeded
--- I return to home and remove WAN cable and put again
 
---- no internet
 
--- WAN port lost connection
2021-06-14 10:18:34 led-controller[1091]: <6> 288051 Start to run WAN1_OFF
2021-06-14 10:18:34 led-controller[1091]: <6> 288051 Start to run WAN0_ON
2021-06-14 10:18:34 led-controller[1091]: <6> 288051 Start to run LAN_ON
 
--- boot completed
2021-06-14 08:18:57 led-controller[1091]: <6> 288051 Start to run WAN1_ON
2021-06-14 08:18:57 led-controller[1091]: <6> 288051 Start to run WAN0_OFF
2021-06-14 08:18:57 led-controller[1091]: <6> 288051 Start to run LAN_ON
2021-06-14 08:18:20 led-controller[1091]: <6> 288051 Start to run WAN1_ON
2021-06-14 08:18:20 led-controller[1091]: <6> 288051 Start to run WAN0_OFF
2021-06-14 08:18:20 led-controller[1091]: <6> 288051 Start to run LAN_ON
  0      
 
  0      
 
#1
Options
8 Reply
Re:WAN disconnect 2 hours after router boot
2021-06-15 08:54:34

@EmilNachev 

 

Can we confirm who is the ISP? 

 

We have reported the issue to the support engineers, they will likely reach out to you via email to continue to troubleshoot your issue.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:WAN disconnect 2 hours after router boot
2021-06-15 09:03:10

@Kevin_Z Vivacom, Bulgaria, Sofia

  0  
  0  
#3
Options
Re:WAN disconnect 2 hours after router boot
2021-06-15 10:02:48

@EmilNachev 

I think the problem is here, dear, TP-LINK developers :)

When this is ON router always lost WAN connection 2 hours after boot.

When this is OFF router working without this problem.

Why?

What is the connection between LEDs and WAN port? 

May be I'm crazy!?!?!

Please explore this and I hope you will fixed this in the next Update firmware release.

Else, I'll return this router in store, and never, never, never buy again TP-LINK products.

Sorry!

 

  0  
  0  
#4
Options
Re:WAN disconnect 2 hours after router boot
2021-06-15 11:14:45

@EmilNachev 

 

Generally, the LED Control should not affect the WAN connection on the router, please don't worry, the support engineers will try to figure it out if this is related.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options
Re:WAN disconnect 2 hours after router boot
2021-06-15 11:18:52
I know "LED Control should not affect the WAN connection on the router" but in real this is solve the problem, but I realy want to see my LEDs.
  0  
  0  
#6
Options
Re:WAN disconnect 2 hours after router boot
2021-06-17 05:51:47

@EmilNachev 

Also, look at these settings:

 

IGMP Proxy: Enabled

IGMP Snooping: Enabled

IGMP Version: V2

Wireless Multicast Forwarding: Enabled

 

It's possible because these settings, WAN disconnecting 1 hour, 59 min and 45 sec. after boot?

  0  
  0  
#7
Options
Re:WAN disconnect 2 hours after router boot
2022-01-17 12:26:07 - last edited 2022-01-17 12:27:22

I have the exact same problem!!!

Sofia, Bulgaria  ISP- Vivacom


AX20 V1.0

 

Did you find a solution to the problem?


@Kevin_Z 

  0  
  0  
#8
Options
Re:WAN disconnect 2 hours after router boot
2022-01-18 06:09:10

@FlaCky 

 

Hello, please install the beta firmware we provided below, then monitor the connectivity again:

https://community.tp-link.com/en/home/forum/topic/521268

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 1067

Replies: 8

Related Articles
Loosing internet connection every ~2 hours on router
1113 0
Locked out of account for 2 Hours
5159 0
 Router will become unresponcive after 2 hours
584 0
 Router rebooting when I disconnect the WAN link
555 0
Router randomly disconnects from WAN
4307 0
PPPoE connection drops every 2 hours
749 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.