Enabling issue with 22, 80 and 443 ports @AC2300 router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Enabling issue with 22, 80 and 443 ports @AC2300 router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Andrejis

2021-06-02 20:01:03

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-06-02

Enabling issue with 22, 80 and 443 ports @AC2300 router

2021-06-02 20:01:03

Model: Archer C2300

Hardware Version:

Firmware Version: 2.0.3 Build 20180810 Rel. 62903

I recently bought a NAS, and I have some issues during set-up which cannot solve. I did the set-up first with a colleague while QNAP was connected to an AC1200. To enable ports from NAS went just fine. But when I've put the device to final place, I have connected to my Archer C2300 router. When tried to enable the ports, 3 of them didn't work: 22, 80 and 443.

I watched some videos about it, and fixed the IP in DHCP Server menu. After as advised I went to NAT Forwarding -> Virtual Servers, and added the 3 ports manually, but I have still Error messages for these 3.

No idea any more. Do you have any suggestion what to do/enable/disable/tick/add/remove? Thanks.

File:

QNAP-ports.JPGDownload

1 Reply

terziyski

LV7

2021-06-09 04:07:40 - last edited 2021-06-09 07:12:08

Posts: 6978

Helpful: 5191

Solutions: 1128

Stories: 7

Registered: 2013-10-12

Re:Enabling issue with 22, 80 and 443 ports @AC2300 router

2021-06-09 04:07:40 - last edited 2021-06-09 07:12:08

@Andrejis

If there's no other network equipment like ISP modem/router in your infrastructure except C2300, make sure that the QNAP server has a static IP address which corresponds to the IP address you've configured in C2300 NAT Forwarding->Virtual servers for SSH, HTTP and HTTPS ports.

If there are other devices like servers, etc. in your local network make sure that you've disabled the UPnP feature in C2300.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

Enabling issue with 22, 80 and 443 ports @AC2300 router

Enabling issue with 22, 80 and 443 ports @AC2300 router

Information

Voters 0

Tags