Solution Powerline Extender Acting as the DHCP server
This Article Applies to:
TL-WPA7510, TL-WPA9610, TL-WPA8730/8630(P) V2, WPA4220 V3, etc.
Problem Description/ Phenomenon:
What is Smart DHCP, and How does Smart DHCP work? Visit TP-Link Smart DHCP Makes Network Configuration Simple.
Some users may find that after the power outage or router’s rebooting, even after router’s internet is back and up running, client devices still get IP address from powerline extender, and cannot connect to the internet.
Note: if router loses internet and then goes back afterwards, powerline extender will do a scan automatically, if it detects another DHCP Server is running, it will disable its own automatically (when powerline units remain paired), and the devices will get IP address from main router then access the internet through that.
Troubleshooting Suggestions:
1. Double check if the main router’s internet is actually back ON and working fine.
To confirm this, wire a computer or laptop to another LAN port of the router using an Ethernet cable, leave the main powerline adapter connected to the LAN port of the router as well, check if you can access the internet successfully on the computer or laptop. If yes, that means the router's DHCP server is up and running; If not, you will need to check what's wrong with the router after the reboot or power outage.
2. Make sure the powerline adapter and extender are still paired (house LEDs are ON), show us the IP address on the clients devices. Compare that when the internet is good and when it is not.
How to check the IP address on a computer: https://www.tp-link.com/support/faq/669/.
If your model is not listed or the issue persists, please report back with the information below to help locate the issue.
Or send a support email to TP-Link technical support with title ‘[Forum ID 265692] Powerline Extender Acting as the DHCP server’ to get further assistance:
1. How did you find out powerline device's DHCP server does not work properly? Did you often reboot main router or is there often power outage in your house?
2. Does router’s internet work fine at that moment?
3. LED status on both powerline units.
4. Brand and Model of router, the network topology, for example:
ISP modem --- Router Archer C7 --- PA8010 .... <powerline> ...WPA8630P --- Asus laptop model X.
5. Model & OS of devices that connected to wireless powerline unit.
6. Model number & firmware and hardware version of your powerline KIT, update the firmware if it is not the latest version:
How to update the firmware of the powerline adapter using the tpPLC Utility: https://www.tp-link.com/support/faq/1091/
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi there @Luke6791
Tl-WA7517 V1 EU version new firmware has been released , check link here on the global website.
O please see if the URL of firmware in the marked solution of this thread works for you.
- Copy Link
- Report Inappropriate Content
@Solla-topee I have the US version and hardware V2, which is not listed in the solution.
- Copy Link
- Report Inappropriate Content
@Solla-topee the download is not available on the Canadian website:
https://www.tp-link.com/ca/support/download/tl-wpa7517-kit/v2/#Firmware
Thanks I went ahead and grabbed it from the US, unfortunately the firmware will not install.
Website:
"Failed to upgrade the firmware. Please check the configuration file and try again."
tpPLC:
☹️ Update failed
The MD5 Hash I am seeing for the downloaded BIN is:
EDAAA6CB60E02766C7B930902C9AA86C
- Copy Link
- Report Inappropriate Content
Thank you for all the case details, can you start a New Thread for firmware updated failed.
Please double check the label of your device and see if it is of (US) or other country version, please share a photo in your new thread.
Please try to turn off the Windows Firewall or antivirus software when update the firmware.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
None of the so call 'fixes' work as far as curing the DHCP problem that blights y the home network when you install one of these TP link devices.
Years of promises and more promises and delays and then so called firmware updates ... nothing stops them causing your home network to keep dropping out.
the BS about fixing the IP address in the powerline device is A Grade BS too....
Just advise people never to buy TP link kit. I have £200 worth of their garbage here that is useless so avoid it at all costs.
- Copy Link
- Report Inappropriate Content
@PC_60 not sure why you reply to me but the latest firmware resolved all of the issues with my device. Works perfectly now. Just needed the 'disable DHCP' option.
- Copy Link
- Report Inappropriate Content
@Solla-topee I got a TL-WPA7510 v1. I don´t have the option to disable it´s dhcp server and the thing is killing my whole homenet.
Please release a firmwarefix for that model too.
Just a button to disable it´s dhcp is fine.
It even shows in the log that it starts the thing at every boot.
- Copy Link
- Report Inappropriate Content
Hi, do you mean your TL-WPA7510 v1 doesn't work at all at this moment, or it works but stops working after your router reboots?
And did you check the IP address on the client devices to confirm if the IP address is assigned by the TL-WPA7510 v1?
Please also provide us your network topology and LED status on your powerline devices.
- Copy Link
- Report Inappropriate Content
@Sunshine
####################################################################
TL-WPA7510 system log
H-Ver = TL-WPA7510 v1.0 : S-Ver = 1.0.6 Build 20181212 Rel.40856
####################################################################
0 days 00:00:04 OTHERS INFO System started.
0 days 00:00:05 WIFI-SCHEDULES INFO Wifi schedules enabled.
0 days 00:00:05 LED-SCHEDULES INFO Led schedules enabled.
0 days 00:00:05 WIFI-MOVE INFO Wi-Fi Move start.
0 days 00:00:24 DHCPS INFO DHCP server started
0 days 00:00:27 MAC-FILTER INFO Access control disabled.
0 days 00:00:27 PARENTAL-CONTROLS INFO Parental control disabled.
In the log you can see it is starting the DHCP but it won´t shut down.
If I set static IP i can use the Network of the Powerline device just fine but that rouge DHCP of the Powerline just nukes connection for every autoassigned device.
Fix is simple, add a toggle to the control of that device so i can shut that thing down. But yeha i can´t and it´s not turning off automagically...
No restarting obv. doesn´t help. My Router is already up, after power outage I manually disconnect the repeater ´cause of that rouge dhcp. That used to work fine but now powerline device is just not turning off the DHCP at all...
Topology for that Powerline:
Injector plugged into the Router and the wall. Wifi part of Powerline set plugged into other outlet.
Yeha the TL set´s itself as default Gateway so i am pretty damn sure it´s the TL fcking up my network. Other confirmation?: None of these errors happens if I just do not connect the TL-WPA to the power... but sadly i ain´t got wifi then.
I got some devices which i can´t assign a static adress.
Only option is to add a damn user control to that device and just let me turn of the useless dhcp in the powerline thing.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 49950
Replies: 200
Voters 2
