New Release Onemesh Firmware for Archer AX10
Hello everyone,
The Onemesh firmware for Archer AX10 is now available, customers who own the router can update the firmware to enjoy the mesh network with the range extender/powerline extender.
Customers can check for the new firmware on the router web GUI or via the Tether app, they can also download the firmware from the TP-Link official website to upgrade the router manually.
Note: Please check the device label to verify the country code and hardware version of your device first, and choose the correct file to download and install.
If you have already connected a range extender to the AX10 network, check this guide to re-build them into Onemesh network:
https://www.tp-link.com/support/faq/2509/
Release note for the firmware:
New Features/Enhancement:
1. Added OneMesh feature;
2. Updated IPTV Profile;
3. Added System Time feature on Tether App;
4. Added QoS Schedule feature;
5. Added a prompt when the negotiation rate of the WAN port is 100Mbps;
6. Optimized the Parental Control feature;
7. Added dual NAT detection and Internet Online time feature on Tether App;
8. Maximum number of clients on the single-band network increased to 128;
9. Added IPTV feature on Tether App;
10. Optimized the Client List;
11. The wireless default encryption method is modified to WPA2+AES.
Bug Fixed:
1. Fixed the FragAttacks vulnerabilities;
2. Fixed the bug that the router incorrectly blocked Internet requests;
3. Fixed the potential shell illegal injection risk of the read and write instructions of the tddp module;
4. Fixed the display error on Network Map page in some cases;
5. Fixed the bug that TKIP encryption was not supported under 11ax only mode;
6. Fixed the bug that Web UI cannot synchronize the operation of deleting UPNP entries;
7. Fixed the bug that the PPTP VPN server feature can't be enabled and the account can't be deleted in some cases;
8. Fixed the bug that the router failed to save system log in AP mode;
9. Fixed the bug that AX10-TDDP causes RCE vulnerabilities;
10. Fixed uhttpd Directory Traversal vulnerabilities;
11. Fixed the bug that Tether app failed to show the IP address in some cases;
12. Fixed the bug that the client type cannot be changed on the Tether App;
13. Fixed the bug that client icon can't be set to other on Tether App.
Do let the community know if there is an issue.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Kevin_Z
it seems resolve the wifi 2.4G drop issue (Disconnection issue) my old phone and other device that only has 2.4G can now connect without problems, after 3 or 4 updates, the issue was now resoved, i wish that the QOS Function has speed limitation for a specific device or IP, but the wifi/router is now usable.
- Copy Link
- Report Inappropriate Content
That's correct. Onemesh can only work when the router is working in Router mode now, you can check the Q8/A8 in the below article:
- Copy Link
- Report Inappropriate Content
Hi,
Recently purchased Wireless Router - Archer AX10, from last one week getting following issue after Firmware update.
1. Router connected to other devices but lights are not showing.
2. TV connected to Router but Router to Internet showing not connected
Above 2 issues facing after Firmware update
Pls help me at the earliest.
Vinod Ari
- Copy Link
- Report Inappropriate Content
Hello, what is the region version of the AX10, is it EU or US? You can find it on the router bottom sticker.
What is the current firmware version on its web UI? Please check the internet connection on the router by referring to the guide below:
- Copy Link
- Report Inappropriate Content
@Kevin_Z Hi, I have the same problem that @Vinod_Ari
In my case, the region is US.
Firmware Version: 1.2.1 Build 20210513 Rel. 79745(5553)
Hardware Version: Archer AX10 v1.20
- Copy Link
- Report Inappropriate Content
Are the two issues also happening after you updated the router firmware? When you mean lights are not showing, do you refer to the LEDs on the AX10? Are all lights not showing, or the internet LED goes off then on?
Please try restoring the router to factory defaults, reconfigure it from scratch to exclude all settings on the router, then check again if the issue persists.
When the TV is connected to the router, does it get a correct IP address from the router? How about other devices in the network, are they still working?
- Copy Link
- Report Inappropriate Content
@Kevin_Z After my router updated, a can not connect to it. I have 2 devices not connected, and 5 devices with no problem.
first is a xiaomi note 7 and the secon a lenovo tablet tb-x605F.
Sorry for my bad english.
- Copy Link
- Report Inappropriate Content
Is there an error message when the Xiaomi note 7 and lenovo tablet tb-x605F failed to connect to the wireless network? Are they both connecting to the 2.4G or 5G network?
How about the wireless settings for the wireless on the router? You can check if it helps by modifying the wireless settings, such as channel and channel width, as for the security, you can choose WPA2-PSK, AES, then reboot the router and check again.
- Copy Link
- Report Inappropriate Content
Hi. No error massage, but I created a guess network on 2,4G, and my devices connected successfully.
- Copy Link
- Report Inappropriate Content
@Kevin_Z
My friend, i cant understand why AX10 receives OneMash firmware update and AX50 dont. Why? AX50 is more expensive... I spent more money.
Best regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 23840
Replies: 113
Voters 0
No one has voted for it yet.