Home Network Community > Wi-Fi Routers > Mesh Wired backhaul between Archer C80 and RE305
< Wi-Fi Routers

Mesh Wired backhaul between Archer C80 and RE305

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Mesh Wired backhaul between Archer C80 and RE305

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Mesh Wired backhaul between Archer C80 and RE305
Mesh Wired backhaul between Archer C80 and RE305
2021-05-05 08:17:43
Model: Archer C80  
Hardware Version: V1
Firmware Version: 1.5.7 Build 210308 Rel.60033n(4555)

Hello,

I hope you can help me with the following:

 

I have an Archer C80 WiFi router and RE305 extender and I want to connect them with Wired backhaul Mesh:

 

1. Archer C80 is receiving the internet from a LAN cable

2. RE305 is receiving the internet from a LAN cable from Archer C80 and is in one mesh network with C80.

 

Since I'm a beginner I'm not sure what I should change in either of the device's settings for that to become available.

 

The reason for this is that where the RE305 is positioned the wifi signal from C80 is not good at all.

 

Thanks in advance for the help enlightened

  0      
 
  0      
 
#1
Options
3 Reply
Re:Mesh Wired backhaul between Archer C80 and RE305
2021-05-05 14:31:05

@zynth 

 

You can do this by configuring RE305 in AP mode.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Mesh Wired backhaul between Archer C80 and RE305
2021-05-05 16:26:50 - last edited 2021-05-05 16:28:23

Yes, but in this way, I'm not able to connect the two devices into a mesh network.

 

Is it possible at all to have 2 devices (C80 and RE205) receiving the internet from a LAN cable (each of them) and to be in one wifi mesh network?

  0  
  0  
#3
Options
Re:Mesh Wired backhaul between Archer C80 and RE305
2021-05-05 17:02:53 - last edited 2021-05-06 03:33:42

@zynth 

 

No, OneMesh doesn't support wired backhaul. Here's a detailed discussion.

You may also check this FAQ - Q5/A5.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1277

Replies: 3

Related Articles
Mesh Netzwerk mit Archer VR2100v und Archer C80
481 0
Tether App - Easymesh - ethernet backhaul Archer C80
948 0
 Mesh with Archer C80 in AP mode
671 0
Archer C80 V3?
530 0
Archer c80 problem
654 0
About OneMesh on Archer C80
1116 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.