Ring camera poor connection any ideas
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi everyone :)
I just installed my new mesh system Deco M4, But having problems with my rear garden ring stick up camera. even thou its only a few feet away from my deco pod. the connection rating is not as good as it was b4 mesh system. I spoke to tech support, but the guy wasn't really interested and said speak to the camera manufacturer. What a charming chap he was . Anybody got any simple fixes ? Looking thru this forum seems to be a common problem. can you Help ? Thank you.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, have you checked the signal strength on the smartphone in the same location?
Is the ring camera 2.4ghz only?
Have you tried to enable the guest network for 2.4ghz only with a different SSID then check whether the 2.4ghz signal is also very poor?
Could you please go to overview>device list>ring camera>wheel button on the top right and save a picture of the device settings page to me?
Thank you very much.
- Copy Link
- Report Inappropriate Content
Hi, have you checked the signal strength on the smartphone in the same location?
Is the ring camera 2.4ghz only?
Have you tried to enable the guest network for 2.4ghz only with a different SSID then check whether the 2.4ghz signal is also very poor?
Could you please go to overview>device list>ring camera>wheel button on the top right and save a picture of the device settings page to me?
Thank you very much.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thank you very much for sharing;
I would be more interested what you did exactly to fix this issue and would you be kind to sharing with us?
Thanks a lot.
- Copy Link
- Report Inappropriate Content
@TP-Link Hi, I just did what was suggested, setting up a guest network with 2.4GHz only, as Ring cameras only work on 2.4GHz. I then reset the Ring camera connecting to the new guest network and it has been an almost perfect improvement. Previously it could take several attempts to get the camera to connect, to the point sometimes I would give up, but it connects almost always (just a couple of instances but I put that down to the connection just waking up if the camera has been dormant for a while, and something I can now live with). Prior to resetting the wifi connection the wifi signal strength was 89% at the camera and the camera was showing the RSSI as -51, so there shouldn't have been an issue with connecting. I therefore can only assume the change to 2.4GHz network is the reason for the much improved performance.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 2315
Replies: 4
Voters 0
No one has voted for it yet.