[New Firmware] Onemesh firmware for Archer AX11000
Update on June 15, 2021:
The new official Onemesh firmware for Archer AX11000 is available now, please check for the updates on the router web GUI or Tether app in one day or two for the new update. You can also download the new firmware from TP-Link official website, and install it manually:
https://www.tp-link.com/support/download/archer-ax11000/#Firmware
Note: You will be unable to downgrade to the previous firmware version after updating this firmware.
-----------------------------------------------------------------------------------------------------------------------------------------
Hello everyone,
We understand you have been waiting for the Onemesh firmware for Archer AX11000 for long, here comes with the beta version. You can manually update your router firmware if you would like to implement the Onemesh with some existing range extenders.
This is the download link:
https://static.tp-link.com/beta/2021/202104/20210416/ax11000v1-up-ver1-2-0-P8[20210415-rel78917]_beta_2021-04-16_10.34.39.zip (No need to install this beta version anymore)
Refer to this guide to add the existing extender to the Onemesh network:
https://www.tp-link.com/support/faq/2509/
We hope you could help provide some details about the network layout, which will help us to understand your usage better:
1. What is the model number of the range extender that you want to add to the AX11000 Onemesh network? How many extenders?
2. How large of the house, how are the AX11000 and the range extenders located, are all on the same floor, or on different floors?
3. How about the Onemesh network performance? Is it as good as expected?
Do let us know how it goes. Have a nice day.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, have you tried my previous suggestions to run a Wi-Fi analyzer to find a clearer 2.4G wireless channel? Just to confirm, have you ever updated to the previous beta Onemesh firmware we provided on the community, was the 2.4G connection stable?
How many 2.4G devices connected to the AX11000 network most of the time? Except for the Amazon Echo devices, how about other 2.4G client devices, are they stable? How about 5G connection?
You can try to reset the router to factory defaults, then reconfigure it from scratch to see if the connection will be stable after that.
- Copy Link
- Report Inappropriate Content
Hi, have you had a chance to reset and reconfigure the router? If that doesn't help, we would like to investigate the issue further via email, please check and respond, thanks
No, I setup a home CCT (lol) to do so this weekend. In the meantime I disabled QOS and OpenMesh and this a drastically reduced the occurrences of this issue.
- Copy Link
- Report Inappropriate Content
Thank you.
Support team did reach me. They had an even more interesting observation. For the non-compliant devices, (which in this case Samsung Galaxy S21 Ultra and Samsung Galaxy S8) would they support wifi protocol IEEE 802.11ax on 2.4G and 5G. Apparently, Samsung Galaxy S8 doesn't as it is on AC protocol. As with Samsung Galaxy S21 Ultra, we do not have a clear solution path since device manufacturer (Samsung) may be needed to troubleshoot the issue.
In the broad spectrum of things, it will be challenging to loop in Samsung into this mix. Based on my previous conversation with support engineers at TP-Link during my troubleshooting of AX11000 speed issues, have noticed that they are very confident the product works extremely well with Apple devices as they may have done extensive tests with those devices. Unfortunately, there are few like me who are probably a minority and living out of Apple eco system.
- Copy Link
- Report Inappropriate Content
yes I previously updated to the Beta firmware. I did not have issues with 2.4Ghz with beta firmware. I probably have 30 or so 2.4Ghz devices. When Amazon echo devices have a network issue they notify you. My other devices do not notify me so I don't know if other devices have issues. I use 2.4Ghz for all devices that do not need high bandwidth. 5.8Ghz I have about another 37 devices. No issues at all on 5.8Ghz. I don't have the time to mess with unstable network issues. I'll sit this one out.
Yes I have scanned my network channels and I'm on the least congested channel for 2.4Ghz.
I moved back to the prior FW and no longer have an issue. I don't intend to update the FW to this mesh enabled FW anytime soon.
- Copy Link
- Report Inappropriate Content
Thanks a lot for the valued observation. I think the support engineers would like to work with you to look into this issue, you may check the email later.
- Copy Link
- Report Inappropriate Content
Got you. So can we confirm the current firmware version on the AX11000 now? We will push the developers to test and confirm.
- Copy Link
- Report Inappropriate Content
I have been having issues with this new firmware.
My phone (iPhone 12 Pro) keeps intermittently losing its connectivity and I have to toggle WiFi to fix it which only helps for a short period of time. I also noticed that I could no longer print to my wireless printer (HP M255dw) but I was able to make that work for now by forcing it to use 2.4GHz instead of dual band. Even if I selected 5GHz only it wouldn't connect or work. One thing that seems to have helped my iPhone connectivity is to change from using WPA2/WPA3-Personal back to WPA/WPA2-Personal. I have WPA2-PSK selected as the Version and have AES for the encryption. I am also using Smart Connect. All of these settings were the same before the firmware update and I had no issues.
On the AX11000 web interface when I look at the clients list I am seeing the list regularly go from 22 to 6 clients, with only those 6 consistent clients showing a Duration of more than 0-2 minutes. It seems like things are constantly having to reconnect.
I have not yet reset to factory settings and re-configured, I'm skeptical that would even make a difference but I'm willing to try it soon when it's a convenient time to take my connection down for a period.
If there are logs I can provide or anything please let me know!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, are all the issue occurring after you upgrade the router firmware, and no other changes in the network? And the iPhone 12 Pro and the printer are working properly now after you made the changes for the security? Just to confirm, what do you mean by "forcing it to use 2.4GHz instead of dual band."? Is this change made on the router or on the printer itself? We have reported the issue to the support engineers, they will likely reach out to you via email to continue to troubleshoot your issue.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Yes that is correct. I only made one change after initially having the problems with the printer, and that was to enable WPA2/WPA3 security. But after I noticed the issues with my iPhone I returned it back to WPA2.
The iPhone seems to be working better, at least it's less noticeable. However the printer still must use 2.4 GHz only (configured on the printer side). I tried disabling OneMesh since I'm not using that and it didn't seem to make a difference. I also still see both wireless and wired clients disappearing and re-appearing from the clients list every couple minutes and showing 0-2 minutes of duration.
I have not yet factory reset the router and re-configured but I still intend on doing that soon when I have a safe opportunity to work on it.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 41503
Replies: 217
Voters 3
