[New Firmware] Onemesh firmware for Archer AX11000
Update on June 15, 2021:
The new official Onemesh firmware for Archer AX11000 is available now, please check for the updates on the router web GUI or Tether app in one day or two for the new update. You can also download the new firmware from TP-Link official website, and install it manually:
https://www.tp-link.com/support/download/archer-ax11000/#Firmware
Note: You will be unable to downgrade to the previous firmware version after updating this firmware.
-----------------------------------------------------------------------------------------------------------------------------------------
Hello everyone,
We understand you have been waiting for the Onemesh firmware for Archer AX11000 for long, here comes with the beta version. You can manually update your router firmware if you would like to implement the Onemesh with some existing range extenders.
This is the download link:
https://static.tp-link.com/beta/2021/202104/20210416/ax11000v1-up-ver1-2-0-P8[20210415-rel78917]_beta_2021-04-16_10.34.39.zip (No need to install this beta version anymore)
Refer to this guide to add the existing extender to the Onemesh network:
https://www.tp-link.com/support/faq/2509/
We hope you could help provide some details about the network layout, which will help us to understand your usage better:
1. What is the model number of the range extender that you want to add to the AX11000 Onemesh network? How many extenders?
2. How large of the house, how are the AX11000 and the range extenders located, are all on the same floor, or on different floors?
3. How about the Onemesh network performance? Is it as good as expected?
Do let us know how it goes. Have a nice day.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Tried with a different device - Razer Blade laptop with an Intel AX200 network adaptor, this one seems to switch well. RE605X is placed mid way to the dead spot.
- Copy Link
- Report Inappropriate Content
Presume we may get a firmware update relatively soon to support 802.11k and 802.11r as detailed in below doc for Samsung devices:
https://docs.samsungknox.com/admin/knox-platform-for-enterprise/kbas/kba-115013403768.htm
- Copy Link
- Report Inappropriate Content
Are you on 2.4Ghz by chance? After updating to "official" SW I constantly have drops on 2.4Ghz.
No, Both machines are connected to 5Ghz
- Copy Link
- Report Inappropriate Content
Hi, have you had a chance to reset and reconfigure the router? If that doesn't help, we would like to investigate the issue further via email, please check and respond, thanks.
- Copy Link
- Report Inappropriate Content
Hi, do you mean the 2.4G is not stable after updating the router firmware to the latest official? Is the Smart Connect on or off? You can try to run Wi-Fi analyzer to review the 2.4G wireless channels, choose one that with less congestion, then monitor.
xokia wrote
Are you on 2.4Ghz by chance? After updating to "official" SW I constantly have drops on 2.4Ghz.
- Copy Link
- Report Inappropriate Content
Hi, the AX11000 Onemesh does support 802.11k and 802.11r. As far as I know, the Samsung Galaxy S8 may not support it, you may check with Samsung support to confirm.
agfa wrote
Presume we may get a firmware update relatively soon to support 802.11k and 802.11r as detailed in below doc for Samsung devices:
https://docs.samsungknox.com/admin/knox-platform-for-enterprise/kbas/kba-115013403768.htm
- Copy Link
- Report Inappropriate Content
correct Wi-Fi is not stable at 2.4Ghz I have devices constantly getting booted off. Specifically Amazon echo devices.
I do not have smart connect on and it was the official latest release.
I went back to an older firmware before this one mesh stuff. I'll wait for you guys to sort out the bugs before I update the FW again or I'll wait until the router shortage ends and buy something else.
- Copy Link
- Report Inappropriate Content
Samsung's below link suggests both devices (Galaxy S8 & Galaxy S21 Ultra) supports both networking protocol:
https://docs.samsungknox.com/admin/knox-platform-for-enterprise/kbas/kba-115013403768.htm
from xda forum:
https://forum.xda-developers.com/t/which-devices-are-compatible-with-802-11r-fast-roaming.3762262/
Not sure if onemesh would be of any advantage if handheld devices are not supported.
- Copy Link
- Report Inappropriate Content
Hi, if that is the case, the issue would be interesting, we will need to analyze it further. The tech team was made aware of your issue. They will likely reach out to you via email to continue to troubleshoot your issue.
- Copy Link
- Report Inappropriate Content
Hi I have AX11000 and 2x RE505X setup on mesh with a number of legacy devices on 2.4ghz and high speed devices running on 5ghz ax.
I have 4 Echo Dots and 1 Echo show that all appear to be stable on the current network.
If you would like to mirror some of my settings to help test your setup then please let me know? 
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 41512
Replies: 217
Voters 3
