Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
2021-04-14 05:31:43 - last edited 2023-02-02 12:16:19
Model: Archer AX1500  
Hardware Version: V1
Firmware Version: 1.1.5 Build 20201230 Rel. 40557(5553)

My connection is wildly unstable out of no where. I check the logs and i see:

 

 

2021-04-13 20:43:32 Led Controller INFO [910] Start to run WAN1_ON

2021-04-13 20:43:32 Led Controller INFO [910] Start to run WAN0_OFF

2021-04-13 20:43:32 Led Controller INFO [910] Start to run LAN_ON

2021-04-13 20:43:30 Led Controller INFO [910] Start to run WAN1_ON

2021-04-13 20:43:30 Led Controller INFO [910] Start to run WAN0_OFF

2021-04-13 20:43:30 Led Controller INFO [910] Start to run LAN_OFF

 

When this happens I disconnect. I have devices connected via Wi-FI and my pcs are connected directly via ethernet. I have factory reset numerous times, rolled back firmware, installed new firmware.. I've only had this router 2 months and its really unstable. Any suggestions?

 

 

 

Thank you in advance.

 

 

 

  2      
  2      
#1
Options
1 Accepted Solution
Re: Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect-Solution
2021-07-02 11:40:43 - last edited 2023-02-02 12:16:19

@Pizgu 

 

Hi, Melladon's disconnect issue was resolved by his ISP, and that was a line issue (or modem issue that we didn't many details). So if you do encounter the same issue, please contact your ISP first to check and ensure the line and modem are working stably and properly by connecting a computer to the modem for some time.

 

If that is confirmed to be stable, please send us the system log on the AX10 router, including the logs before and after the router disconnects from the internet.

 

BTW, who is your ISP?

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  1  
  1  
#10
Options
16 Reply
Re: Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
2021-04-14 05:44:02

@Melladon 

 

Can you please confirm if the model number is Archer AX1500 or AX10, you can find it on the device bottom label?

 

May I know who is your ISP? When the internet drops on the AX1500, how about the internet LED on it, is it still green or orange?


Have you confirmed this with your ISP also? Please connect the computer directly to the ISP modem, check if it can maintain a stable internet connection. If yes, please try to clone the PC's MAC address to the AX1500 by connecting this PC to the AX1500 LAN port, then monitor again.


If the issue persists, please kindly send us the whole system log, including those before and after the dropouts, our engineer with try to investigate.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re: Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
2021-04-14 07:02:06

@Kevin_Z 

 

The router is an archer ax1500

 

My ISP is Comcast

 

The LEDS have stayed green the entire time this happens.

 

 

Ive contacted comcast numerous times with no issue at all. Ive ran from my modem directly to my pc via ethernet for 2 days with not a single disconnect.

 

 

Here is the log I have since i restarted router.

 

 

####################################################################
2021-04-13 23:58:50 nat[11469]: <6> 211501 Initialization succeeded
2021-04-13 23:58:49 nat[11469]: <6> 211501 Initialization succeeded
2021-04-13 23:58:46 remote-management[11731]: <6> 282505 Service stop
2021-04-13 23:58:43 led-controller[911]: <6> 288051 Start to run WAN1_ON
2021-04-13 23:58:43 led-controller[911]: <6> 288051 Start to run WAN0_OFF
2021-04-13 23:58:43 led-controller[911]: <6> 288051 Start to run LAN_ON
2021-04-13 23:58:42 nat[10316]: <6> 211501 Initialization succeeded
2021-04-13 23:58:42 remote-management[10952]: <6> 282505 Service stop
2021-04-13 23:58:42 nat[10316]: <6> 211501 Initialization succeeded
2021-04-13 23:58:37 nat[9571]: <6> 211501 Initialization succeeded
2021-04-13 23:58:36 nat[9571]: <6> 211501 Initialization succeeded
2021-04-13 23:58:36 remote-management[9792]: <6> 282505 Service stop
2021-04-13 23:58:32 led-controller[911]: <6> 288051 Start to run WAN1_OFF
2021-04-13 23:58:32 led-controller[911]: <6> 288051 Start to run WAN0_ON
2021-04-13 23:58:32 led-controller[911]: <6> 288051 Start to run LAN_ON
2021-04-13 23:58:31 traffic-stats[7400]: <6> 269001 Clear all stats because time changed
2020-12-30 00:00:57 led-controller[911]: <6> 288051 Start to run WAN1_OFF
2020-12-30 00:00:57 led-controller[911]: <6> 288051 Start to run WAN0_ON
2020-12-30 00:00:57 led-controller[911]: <6> 288051 Start to run LAN_OFF
2020-12-30 00:00:57 nat[8556]: <6> 211501 Initialization succeeded
2020-12-30 00:00:56 nat[8556]: <6> 211501 Initialization succeeded
2020-12-30 00:00:56 led-controller[911]: <6> 288051 Start to run STATUS_ON
2020-12-30 00:00:55 qos[8311]: <6> 259504 Service start
2020-12-30 00:00:54 qos[8311]: <6> 259503 Function disabled
2020-12-30 00:00:54 led-controller[911]: <6> 288051 Start to run NIGHT
2020-12-30 00:00:54 led-controller[911]: <6> 288051 Start to run GENERAL
2020-12-30 00:00:39 traffic-stats[7383]: <6> 269504 Service start
2020-12-30 00:00:36 factory-reset[7027]: <6> 284504 Service start
2020-12-30 00:00:36 parental-control[6932]: <6> 229504 Service start
2020-12-30 00:00:36 parental-control[6932]: <6> 229502 Function enabled
2020-12-30 00:00:35 nat[6246]: <6> 211501 Initialization succeeded
2020-12-30 00:00:35 nat[6246]: <6> 211501 Initialization succeeded
2020-12-30 00:00:34 access-control[6559]: <6> 239504 Service start
2020-12-30 00:00:34 access-control[6559]: <6> 239503 Function disabled
2020-12-30 00:00:34 remote-management[6566]: <6> 282505 Service stop
2020-12-30 00:00:34 nat[5474]: <6> 211021 IPSEC ALG enabled
2020-12-30 00:00:34 nat[5474]: <6> 211021 L2TP ALG enabled
2020-12-30 00:00:34 nat[5474]: <6> 211021 PPTP ALG enabled
2020-12-30 00:00:34 nat[5474]: <6> 211021 SIP ALG enabled
2020-12-30 00:00:34 nat[5474]: <6> 211021 RTSP ALG enabled
2020-12-30 00:00:34 nat[5474]: <6> 211021 H323 ALG enabled
2020-12-30 00:00:33 nat[5474]: <6> 211021 TFTP ALG enabled
2020-12-30 00:00:33 nat[5474]: <6> 211021 FTP ALG enabled
2020-12-30 00:00:31 upnp[5867]: <6> 217504 Service start
2020-12-30 00:00:30 upnp[5867]: <6> 217505 Service stop
2020-12-30 00:00:30 nat[5474]: <7> 211001 Flush conntrack
2020-12-30 00:00:30 nat[5474]: <6> 211502 Function enabled
2020-12-30 00:00:30 nat[5474]: <5> 211051 Create NAT chain succeeded
2020-12-30 00:00:29 nat[5474]: <6> 211501 Initialization succeeded
2020-12-30 00:00:29 nat[5474]: <6> 211501 Initialization succeeded
2020-12-30 00:00:26 remote-management[5213]: <6> 282505 Service stop
2020-12-30 00:00:25 basic-security[4585]: <6> 219504 Service start
2020-12-30 00:00:25 basic-security[4585]: <5> 219606 Flush conntrack table succeeded
2020-12-30 00:00:23 imb[4731]: <6> 218507 Daemon connection succeeded
2020-12-30 00:00:23 imb[4731]: <6> 218012 ARP Binding disabled
2020-12-30 00:00:23 imb[4731]: <6> 218506 Config interface initialization succeeded
2020-12-30 00:00:23 imb[4731]: <6> 218501 Initialization succeeded
2020-12-30 00:00:23 upnp[4594]: <6> 217504 Service start
2020-12-30 00:00:22 upnp[4594]: <6> 217505 Service stop
2020-12-30 00:00:22 firewall[3790]: <6> 209504 Service start
2020-12-30 00:00:18 remote-management[3939]: <6> 282505 Service stop
2020-12-30 00:00:17 led-controller[911]: <6> 288051 Start to run WIFI2G_ON
2020-12-30 00:00:17 led-controller[911]: <6> 288051 Start to run WIFI5G_ON
2020-12-30 00:00:00 time-settings[940]: <6> 279504 Service start
1970-01-01 00:00:08 led-controller[911]: <6> 288504 Service start

 

 

 

 

  0  
  0  
#3
Options
Re: Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
2021-04-14 07:43:55

@Melladon 

 

As per the log it shows the router restarts and re-connect to the internet, so no much info we can find. Please don't restart the router manually next time when the internet drops on it, login to the web interface of the AX1500, check if there is still a WAN IP address, try to do a ping test by launching the Advanced > System > Diagnostics, ping 8.8.8.8, then ping www.google.com. If 8.8.8.8 is pingable while www.google.com is not, try to manually set the Internet DNS server to 8.8.8.8 and 8.8.4.4, then reboot the router to confirm the connectivity.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#4
Options
Re: Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
2021-04-14 07:45:56 - last edited 2021-04-14 08:00:51

@Kevin_Z 

 

@Kevin_Z 

 

That restart was from 7:00 am, I have a scheduled restart set every morning because of the issues I've been having. It wasn't manual. 

 

Judging by the amount of people having this issue, seems like no clear solution. 

 

 

Thanks for your help.

 

  0  
  0  
#5
Options
Re: Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
2021-04-14 08:18:42

@Melladon 

 

Got it. Can you please disable the autp-reboot first, and confirm if you can ping 8.8.8.8 and www.google.com when the internet drops next time? We will escalate the case to a specialist to help locate the issue ASAP.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options
Re: Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
2021-04-14 09:15:13

@Kevin_Z 

 

Connection dropped 2x in the last 10 mins.

 

Pinged google and failed after one attempt. Didn't even send the other 3 attempts.

 

Then reconnected a few seconds after, and disconnected again.

  0  
  0  
#7
Options
Re: Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
2021-04-14 11:20:59

@Melladon 

 

Thanks for the fast response. We would like to follow up via email, please check your mailbox and reply.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options
Re: Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
2021-06-30 17:16:05

@Melladon 

I've the same issue, still restarting diod, could You also connect me via support email?

 

PS. I've buyed for my family another :) Now it's Archer AX10

  0  
  0  
#9
Options
Re: Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect-Solution
2021-07-02 11:40:43 - last edited 2023-02-02 12:16:19

@Pizgu 

 

Hi, Melladon's disconnect issue was resolved by his ISP, and that was a line issue (or modem issue that we didn't many details). So if you do encounter the same issue, please contact your ISP first to check and ensure the line and modem are working stably and properly by connecting a computer to the modem for some time.

 

If that is confirmed to be stable, please send us the system log on the AX10 router, including the logs before and after the router disconnects from the internet.

 

BTW, who is your ISP?

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  1  
  1  
#10
Options
Re: Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
2021-07-14 18:32:32

@Kevin_Z 

 

I have an Archer AX10 (v1.20) as well and it was working great for the last year. After the most recent firmware update (1.2.0 Build 20210421 Rel. 64516) which I installed a couple of weeks ago I have been losing internet connection every few days.

 

2021-07-09 12:18:40 Led Controller INFO [913] Start to run WAN1_ON
2021-07-09 12:18:40 Led Controller INFO [913] Start to run WAN0_OFF
2021-07-09 12:18:40 Led Controller INFO [913] Start to run LAN_ON
2021-07-09 12:18:10 Led Controller INFO [913] Start to run WAN1_OFF
2021-07-09 12:18:10 Led Controller INFO [913] Start to run WAN0_ON
2021-07-09 12:18:10 Led Controller INFO [913] Start to run LAN_ON
2021-07-08 00:12:19 Led Controller INFO [913] Start to run WAN1_ON
2021-07-08 00:12:19 Led Controller INFO [913] Start to run WAN0_OFF
2021-07-08 00:12:19 Led Controller INFO [913] Start to run LAN_ON
2021-07-08 00:12:04 Led Controller INFO [913] Start to run WAN1_OFF
2021-07-08 00:12:04 Led Controller INFO [913] Start to run WAN0_ON
2021-07-08 00:12:04 Led Controller INFO [913] Start to run LAN_ON
2021-07-07 20:55:05 Led Controller INFO [913] Start to run WAN1_ON
2021-07-07 20:55:05 Led Controller INFO [913] Start to run WAN0_OFF
2021-07-07 20:55:05 Led Controller INFO [913] Start to run LAN_ON
2021-07-07 20:55:00 Led Controller INFO [913] Start to run WAN1_OFF
2021-07-07 20:55:00 Led Controller INFO [913] Start to run WAN0_ON
2021-07-07 20:55:00 Led Controller INFO [913] Start to run LAN_ON
2021-07-07 20:54:58 Led Controller INFO [913] Start to run WAN1_OFF
2021-07-07 20:54:58 Led Controller INFO [913] Start to run WAN0_OFF
2021-07-07 20:54:58 Led Controller INFO [913] Start to run LAN_ON

 

The above is what I see in the log files and the internet LED turns orange. Devices do remain connected to the router (by WiFi and ethernet) and there are no errors reported by the cable modem (internet remains functioning). In order to get the internet working again requires turning the router off and back on.

 

There are no ISP or modem problems so this seems to be an issue within the router. Please let me know if you require further information.

 

  17  
  17  
#11
Options