Firmware 1.5.3 broken check firmware updates and TP-Link DDNS
Hi, I just installed the firmware 1.5.3 (Build 20210203 Rel. 68223) of the M5 set (v1.0). Until version 1.5.2 everything was pretty good but now i have noticed that these 2 functions are compromised by the Deco app (2.4.30): 1) Check firmware updates (no longer available) 2) TP-Link DDNS disabled, not access internet (it is no longer possible to access the cloud outside the LAN to configure Deco from the app) Everything else is as it should go.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@xsim75 I had the same after installing v1.5.2 on Sunday. The firmware checks have started working again this afternoon. The external access seems to work fine too now.
xsim75 wrote
Hi, I just installed the firmware 1.5.3 (Build 20210203 Rel. 68223) of the M5 set (v1.0). Until version 1.5.2 everything was pretty good but now i have noticed that these 2 functions are compromised by the Deco app (2.4.30): 1) Check firmware updates (no longer available) 2) TP-Link DDNS disabled, not access internet (it is no longer possible to access the cloud outside the LAN to configure Deco from the app) Everything else is as it should go.
- Copy Link
- Report Inappropriate Content
So could it be a server-side problem ?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, Did you still have the issue about the DDNS issue on the Deco?
As for the new firmware detection, the firmware upgrade is applied in sequence to the correct devices during the release process.
So not all the users would see the notification in the first place.
Thank you very much and wait for your reply.
- Copy Link
- Report Inappropriate Content
Last night, without me doing anything, the two functions are back to work. Thanks so much for the support! ;)
I come from Sardinia (Italy).
- Copy Link
- Report Inappropriate Content
@xsim75 even I am seeing same issue
After firmware update it was running fine for 2-3 days
suddenly my master device is not able to find slave
- Copy Link
- Report Inappropriate Content
Hi, you might need to help me get more details about your current issue:
1. Would any Deco turn red when master Deco could not find the slave?
or all the Deco stayed green and on the Deco APP, it said the satellite Deco was offline?
2.How often did this issue repeat within one day?
3.How did you restore the internet connection on the satellite Deco, reboot the Deco or it would come back automatically?
Thank you very much and wait for your reply.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 1343
Replies: 7
Voters 0
No one has voted for it yet.