Home Network Community > Deco > WiFi speed stuck at 100mbps on Deco X20
< Deco

WiFi speed stuck at 100mbps on Deco X20

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

WiFi speed stuck at 100mbps on Deco X20

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WiFi speed stuck at 100mbps on Deco X20
WiFi speed stuck at 100mbps on Deco X20
2021-03-22 14:34:58
Model: Deco X20  
Hardware Version: V1
Firmware Version: 1.0.5

I notice that i cannot get full speed after replace my maxis router with Deco X20. 

My laptop (Qualcomm QCA9377 802.11ac Wireless Adapter) show speed for WiFi is 433Mbps, but when I test using iPerf3, it show transfer rate it below 100Mbps. Distance between Deco and laptop just 2 meter without any wall in between. I should get speed more than that. During the test, i switch off my second M5 Deco which I connect by ethernet backhaul. Please help.

 

Below I attach screenshot for your referring.

 

  0      
 
  0      
 
#1
Options
14 Reply
Re:WiFi speed stuck at 100mbps on Deco X20
2021-03-22 15:45:25

@Hazree 

 

I am not sure if it will be applicable to X20 or not, but with my M9Plus and M5 I could only get transfer speeds faster than 100Mbps when I disable 2.4GHz for Main Network in Deco app and leave no choice for mobile devices but to connect on 5GHz.

 

You can try, no harm doing that: disable 2.4GHz in WiFi configuration settings for Main Network, bounce WiFi connection on laptop and see if you'll get better results when band steering is off because only 5GHz is available.

  0  
  0  
#3
Options
Re:WiFi speed stuck at 100mbps on Deco X20
2021-03-22 16:07:33
I will try it. But disable 2.4Ghz is not idle solution because most of smart home device using 2.4Ghz connection type. Deco X20 should be able handle both connection type simultaneosly and maintain it full speed.
  0  
  0  
#4
Options
Re:WiFi speed stuck at 100mbps on Deco X20
2021-03-22 16:11:05 - last edited 2021-03-22 16:12:17

@Hazree 

 

If you find that disabling 2.4GHz increases WiFi speed substantially, I'll share with you how I dealt with devices that can only run on 2.4GHz, in my household. What I did would be applicable to your Deco mesh with X20.

 

If disabling 2.4GHz makes no difference, the problem is elsewhere. I am just sharing my experience. 

  0  
  0  
#5
Options
Re:WiFi speed stuck at 100mbps on Deco X20
2021-03-26 00:11:59

@Alexandre. 

 

I just disable 2.4Ghz but the result is still same. 

Only 5 device connected to X20 with only 5Ghz enable and the result is very very very disappointed. BTW where TPlink support person?

 

 

  0  
  0  
#6
Options
Re:WiFi speed stuck at 100mbps on Deco X20
2021-03-26 01:13:48

@Hazree 

Hi, How much speed you are supposed to get from the internet service provider?

Did you enable any QOS or high priority on the Deco?

--if yes, please go to Deco APP>>>QoS>>>(Set Application priority to Standard, Remove all high priority devices, set the Bandwidth to 1000Mbps upload and 1000Mbps download);

 

And there is a new firmware for Deco X20 V1.2 recently:

Deco X20_V1.20_1.5.1_20210204

https://static.tp-link.com/2021/202103/20210311/Deco_X20_V1.2_1.5.1_20210204.zip

If possible, please also update the firmware to be the latest one to have a look;

 

By the way, have you evet tested the speed on other mobile devices, and did they also have a limited speed?

Thank you very much.

 

 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  1  
  1  
#7
Options
Re:WiFi speed stuck at 100mbps on Deco X20
2021-03-26 11:29:16

@TP-Link 

 

Deco app display i already has a latest firmware. Should i update firmware for X20 manually?

If X20 has a latest version of firmware, why Deco app not update it automatically?

 

  0  
  0  
#8
Options
Re:WiFi speed stuck at 100mbps on Deco X20
2021-04-09 06:48:36

@Hazree 

after upgade firmware V1.2_201013 the speed will drop to 100mpbs cause my X20 also same problem , better downgrade to V1.2_200630 then the speed will back to normal due to tp link no settle this issue very bad , better dun buy tp link any more cause this issue since start on october 2020 untill this new firmware also cannot settle this problem.

  0  
  0  
#9
Options
Re:WiFi speed stuck at 100mbps on Deco X20
2021-04-09 09:27:09

@jrtham 

 

I just update to latest firmware for X20 which is 1.5.1. Not try to test yet on iperf3. Hope its has an improvement. 

 

  0  
  0  
#10
Options
Re:WiFi speed stuck at 100mbps on Deco X20
2021-04-10 04:51:16

@Hazree 

i cannot update to 1.5.1 , i only update to 1.5.0 , the problem still same internet speed max 100mpbs only, every time hv to restart router x20 only can get 300mpbs for 2min, after 2 min back to 100mpbs

 

  0  
  0  
#11
Options
Re:WiFi speed stuck at 100mbps on Deco X20
2021-04-12 09:45:40

This is the result when using iperf3 on X20 new firmware which is I can say it not improve at all.

Wireless speed is still below 100Mbps. QoS already set to standard mode. Not happy at all with this result. Tp-Link support person, please help.

 

 

  0  
  0  
#12
Options
12

Information

Helpful: 0

Views: 7846

Replies: 14

Related Articles
 Deco X20 stuck at 100 Mbps.
458 0
 Deco X20 v1.2 wifi capped at 100mbps
1074 0
 Deco X20 low wifi speed
1991 1
Deco X20 LAN speeds capped at 100 Mbps
500 0
 Deco x20 WiFi speed slower speedtest results of the x20
739 2
 Slow WiFi Mesh speed, Deco X20.
1237 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.