Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > Archer C50 not giving full speed

< Wi-Fi Routers

Archer C50 not giving full speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C50 not giving full speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ArtE

2021-03-08 20:08:00

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-03-08

Archer C50 not giving full speed

2021-03-08 20:08:00

Model: Archer C50

Hardware Version: V4

Firmware Version: 0.9.1 0.2 v0093.0 Build 200608 Rel.66307n(4555)

Hello,

I bought a TP-Link Archer C50 router and it's connected to a 250 Mbps ethernet port, and I'm only getting up to about 85 Mbps on the 5G LAN.

The specifications state the speed and not the bandwidth, which should be reliable enough but apparently they're not:

5 GHz: 867 Mbps (802.11ac)
2.4 GHz: 300 Mbps (802.11n)

When I connect my PC to the wired connection I use for my router, I directly get 250 Mbps. I know that this router only has 100 Mbps ethernet connections, but on the 5G it should not be limited to 100 Mbps.

I have already updated it to the latest firmware version and I'm standing right in front of it with the device that's testing the speed.

What else should I do? This already feels like a rip-off.

Thanks in advance!

1 Reply

terziyski

LV7

2021-03-10 00:05:09 - last edited 2021-03-12 19:33:53

Posts: 6971

Helpful: 5187

Solutions: 1126

Stories: 7

Registered: 2013-10-12

Re:Archer C50 not giving full speed

2021-03-10 00:05:09 - last edited 2021-03-12 19:33:53

@ArtE

C50 has 4x100 mbps LAN ports and 1x100 mbps WAN port (Internet port).

You're not limited to 100 mbps for the traffic that goes between wireless devices only (in your LAN).

When the traffic goes through a LAN or WAN port (wired connection) it would be limited to 100 mbps - that's a bottleneck you can't avoid.

If you wonder what's the point of having more than 100 mbps over the wireless and up to 100 mbps over the ethernet ports:

1) Greater bandwidth for the traffic that goes between the wireless devices only (in your LAN).

2) The wireless extender feature can give you faster than 100 mbps speed, but again only over the wireless connection in your LAN.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

Archer C50 not giving full speed

Archer C50 not giving full speed

Information

Voters 0

Tags