Home Network Community > Wi-Fi Routers > Bandwidth slow down when router plugged in
< Wi-Fi Routers

Bandwidth slow down when router plugged in

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Bandwidth slow down when router plugged in

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Bandwidth slow down when router plugged in
Bandwidth slow down when router plugged in
2013-02-25 05:54:20
Region : Canada

Model : TL-WDR4300

Hardware Version : V1

Firmware Version : 3.13.17 Build 120426 Rel.29216n

ISP : Bell Canada

Hello,

Just had my line upgraded to 50mbit down, and 10mbit up. Whenever the router is between the PC and the modem, my speeds drop to 30mbit. If i plug directly into the modem, I get the full 50Mbit. Upload speeds are always 10mbit.

I've tried power cycling devices, and even replaced all cables with cat6 (which I know isn't the issue, but i'm just trying to eliminate everything).

Any idea on what else could be wrong?

thanks
slim
  0      
 
  0      
 
#1
Options
6 Reply
Re:Bandwidth slow down when router plugged in
2013-02-25 07:22:30
Several causes/solutions :
- Upgrade your firmware to at least 120810 version; i saw some messages that the 121225 version has some issues (search a bit in the forum):
http://www.tp-link.com/en/support/download/?model=TL-WDR4300&version=V1#tbl_j
- Is your modem also a router? Then you have double security functions. Put (or let your ISP put) it in bridge mode, then the router gets an IP of your ISP and all security functions of the modem are bypassed and are in the router.
- If you want to keep the modem as a router, switch off the firewall/wireless of the modem and fix the IP of the router in your modem (this is my config at the moment, going to switch to bridge mode shortly - cisco ep3925 modem with wdr3600).
I have a 60/6 Mbit connection without significant loss of speed.

Regards, Hugo
  0  
  0  
#2
Options
Re:Bandwidth slow down when router plugged in
2013-02-25 07:47:16

hvgsel wrote

Several causes/solutions :
- Upgrade your firmware to at least 120810 version; i saw some messages that the 121225 version has some issues (search a bit in the forum):
http://www.tp-link.com/en/support/download/?model=TL-WDR4300&version=V1#tbl_j
- Is your modem also a router? Then you have double security functions. Put (or let your ISP put) it in bridge mode, then the router gets an IP of your ISP and all security functions of the modem are bypassed and are in the router.
- If you want to keep the modem as a router, switch off the firewall/wireless of the modem and fix the IP of the router in your modem (this is my config at the moment, going to switch to bridge mode shortly - cisco ep3925 modem with wdr3600).
I have a 60/6 Mbit connection without significant loss of speed.

Regards, Hugo


Thanks forgot to mention that yes it's already in bridge mode, and i'm starting to think it may be something in the modem itself, because i tried my old linksys with dd-wrt and it was doing the same thing, only 30mbit while full 50mbit without a router.

I will take the time to upgrade my fw however, thanks for the pointer.
  0  
  0  
#3
Options
Re:Bandwidth slow down when router plugged in
2013-02-25 08:26:15
Ok, so no problem over bridge mode then.

There were significant problems with the hardware NAT of the WDR4300 and they should be solved with the firmware updates (only 10 minutes of work).

Success, hope you find it. Hugo
  0  
  0  
#4
Options
Re:Bandwidth slow down when router plugged in
2013-02-25 08:49:45
Wow thanks for the idea. Here's what i had to do.

I had 2 devices that plugged into my modem, and would get seperate WAN IP's. 1 would be my router, and everything on my home LAN, the other is a device for my work that gives me a VPN and a VOIP phone from home.
both my router and work device would have PPPOE settings in them, and the modem would work in bridge mode, and both would establish PPPOE themselves as opposed to through the modem.

What i've now done, i've left the work device as-is. My router, I changed from PPPOE to auto, then i setup my modem with DMZ and point to the IP address it gave my router.

Boom, everything works now, as designed, and i'm getting full speed.

Thanks again
slim
  0  
  0  
#5
Options
Re:Bandwidth slow down when router plugged in
2013-02-25 15:36:46
a great article contain many information like the person like me...thanks for publish this one....Nice article, i appreciate for putting this together! “This is obviously one great post. Thanks for the valuable information and insights you have so provided here. Keep it up!”
  0  
  0  
#6
Options
Re:Bandwidth slow down when router plugged in
2013-02-25 21:39:05
slim94,

Sorry i forgot to mention the DMZ; i did it too. Don't forget to reserve the IP-address of your router in DHCP. of your modem, then you're always good!
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 971

Replies: 6

Related Articles
Router with Bandwidth Control?
3061 0
Looking for router with bandwidth controls
1290 0
Router C80 - No Bandwidth Control
506 0
Bandwidth difference with and without router
490 0
 Slow bandwidth on AV1200 - Suggestions
497 0
 Slow VPN speed / bandwidth
1460 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.