Home Network Community > Wi-Fi Routers > Archer AX10 problems
< Wi-Fi Routers

Archer AX10 problems

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX10 problems

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX10 problems
Archer AX10 problems
2021-02-19 19:14:57 - last edited 2021-02-23 02:47:27
Model: Archer AX10  
Hardware Version: V1
Firmware Version: 1.1.2 Build 20201203 Rel. 36965(4555)

Hi,

 

I have just bought Archer AX10 to replace my old TL-MR3220 which didn't have any issues listed bellow, just wanted to renew and have stronger wi-fi in my flat.

 

After connecting Archer AX10 faced those issues:

1) some websites are not working and I am getting errors: You don't have authorization to view this page. HTTP ERROR 403 or ERROR The requested URL could not be retrieved;

2) torrents are not working, can't find any peers;

3) poor 2,4 GHz coverage, it looks like that old TL-MR3220 has the same or even better wi-fi coverage.

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Archer AX10 problems-Solution
2021-02-22 18:37:47 - last edited 2021-02-23 02:47:27

@Ivaylo 

 

Problems solved with MAC change, but 2.4ghz coverage could be better. @Ivaylo thank you for help.

Recommended Solution
  0  
  0  
#11
Options
10 Reply
Re:Archer AX10 problems
2021-02-19 22:48:57 - last edited 2021-02-19 22:50:05

@BigZ 

 

You can try using different DNS for resolving 1) and 2) if that's the issue, like this:

 

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Archer AX10 problems
2021-02-20 15:27:42

@Ivaylo 

 

I have already tried it, it didn't work for me. Set DNS on router and laptop. Nothing. All laptops, smartphones receives the same errors. Subnet mask differs maybe it can be the problem? Thank you.

  0  
  0  
#3
Options
Re:Archer AX10 problems
2021-02-20 18:19:50 - last edited 2021-02-20 18:22:34

Who's your ISP ?

What's the device before the AX10 router ?

Did you set the same Internet port configuration as with the old router ?

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:Archer AX10 problems
2021-02-20 18:31:23

@Ivaylo 

 

ISP - www.penki.lt - did not change;

Old router - TP link MR3220 the oldiest version of it works without any above mentioned errors and coverage is the same or even better than AX10. AX10 looks like a downgrade. It has speed which can't be used because it doesn't work properly.

  0  
  0  
#5
Options
Re:Archer AX10 problems
2021-02-20 19:35:21 - last edited 2021-02-20 19:56:42

My question was - do you have any ISP device (modem/router) to which you connect the AX10 ? If yes, then what is it ?

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options
Re:Archer AX10 problems
2021-02-20 19:47:01

@Ivaylo 

 

AX10 is connected into switch ZyXEL ES-105A before it there is a MICROSENS Converter. No additional modem or router.

  0  
  0  
#7
Options
Re:Archer AX10 problems
2021-02-20 20:51:07 - last edited 2021-02-21 01:23:35

Is the topology like this: <Media Converter>=><Switch>=>AX10=><your local network>

You have a double NAT in your network. Once before the AX10 and then again in the AX10.

Are your WAN/Internet port settings the same as your old TL-MR3220 ? Is it still in your possession to check that ?

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#8
Options
Re:Archer AX10 problems
2021-02-21 09:46:37

@Ivaylo 

 

Yuo are right the technology as described. I use old router for web pages which can't be opened on AX10  and torrents. I have never ever set anything on old router. This is what I see on my old one. What do you recomend to change on AX10? Thank you.

 

  0  
  0  
#9
Options
Re:Archer AX10 problems
2021-02-21 15:37:42 - last edited 2021-02-21 15:53:19

@BigZ 

 

Here's the difference (old router):

Your old router is receiving public IP address, which is the correct behavior.

This is AX10:

Here, you're receiving a private IP address, which is different - both routers are set to receive a Dynamic IP.

Are you connecting the AX10 the same way as your old router has been connected ? Please describe devices' cabling in details.

Do you know if your ISP is using MAC address protection ? If it does, then you have to copy the old router WAN MAC address to the AX10 WAN MAC address.

Try copying that MAC address:

 

 

Here:

 

 

reboot the AX10 and see if you are receiving the same public IP address as it was with the old router.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#10
Options
Re:Archer AX10 problems-Solution
2021-02-22 18:37:47 - last edited 2021-02-23 02:47:27

@Ivaylo 

 

Problems solved with MAC change, but 2.4ghz coverage could be better. @Ivaylo thank you for help.

Recommended Solution
  0  
  0  
#11
Options

Information

Helpful: 0

Views: 2314

Replies: 10

Related Articles
 Archer ax10/ax1500 2.4ghz problems
704 0
Onemesh Firmware for Archer AX10
23779 1
Archer AX10 Smart Connect
539 0
EasyMesh in Archer AX10 with EAP610
655 1
archer ax10 ipv6 not working
1211 0
Archer AX10 Mesh setup
6523 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.