How to turn off DHCP in TL-WPA8631P
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I've recently bought a TL-WPA8631P V3 (I'm in Spain)
Since the installation every 3/4 days the DHCP starts without the possibility to stop it.
Only reset can disable the DHCP.
I can see it has started from log file, i.e. :
0 days 00:00:42 DHCPS INFO DHCP server started
on the TP-Link repeater I had before, I could enable and disable the DHCP.
I saw it is a common issue on TP-Link repeater.
I tried to downgrade firmware from the newest to the oldest but the issue is still here. now I'm running firmware 3.0.0 Build 20200927 Rel.61199
Can someone help me please?
Thanks,
AleP
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello everyone,
TL-WPA8631P V3 new firmware has added the DHCP off feature on the latest firmware released in 2022.
For more information about powerline smart DHCP and the latest beta firmware, please refer to thread below:
[Solution] Powerline Extender Acting as the DHCP server
For maintain purpose, the following beta firmware will be updated on the above thread, feel free to leave your comment there if you met similar issue or the beta works for you.
- Copy Link
- Report Inappropriate Content
Hi,
Thank you very much for your kind feedback.
I have reported to the senior engineers already for a better solution.
At the same time, have you had to manually set up the static IP address and configure the router’s LAN IP address as the gateway?
Thanks a lot and wait for your reply.
- Copy Link
- Report Inappropriate Content
Hello,
I've tried to configure the static IP on the repeater, using the router IP as the default gateway.
But the client connected to the powerline via WI-FI is getting the correct IP (the same that router assign) and the wrong Gateway (the powerline IP)
for example:
Router's IP 192.168.0.1
Powerline:
IP 192.168.0.100 (static)
Default Gateway 192.168.0.1
Device:
IP 192.168.0.101
Default Gateway 192.168.0.100
And the device cannot reach internet.
- Copy Link
- Report Inappropriate Content
Hello all,
same issue here as many devices in the past. It would help to be able to turn off DHCP server on these devices.
I ve read people installing custom firmware to do so.
Please advise.
Kind regards,
Niko
- Copy Link
- Report Inappropriate Content
@nstnst Hi Nico,
May I know the hardware version & model number of your powerline device, do you also use TL-WPA8631P ( EU ) V3? Please help check on the sticker, thank you.
- Copy Link
- Report Inappropriate Content
@Solla-topee
hey are there any firmware betas for the WPA8631P to turn of the DHCP to prevent the error?
I hhave the V3 EU Version.
I saw in a another thread for the WPA8630P that there was a beta firmware i hope you could provide one for the new WPA8631P too
Thank you
- Copy Link
- Report Inappropriate Content
@Tilli Hello,
I sent you a beta firmware via private message, you could click on your profile to check the message~
- Copy Link
- Report Inappropriate Content
@Solla-topee Hello, I am also having an issue where the DHCP server in the PowerLine adapter is causing conflicts on the LAN. I am running :
Firmware Version: 3.0.0 Build 20200619 Rel.33581
Hardware Version: TL-WPA8631P v3.0
Hardware Version: TL-PA8010P 3.0
What are my options to disable the DHCP server on the PowerLine adapter set?
Thank you
- Copy Link
- Report Inappropriate Content
Hi can I please have a copy of the beta firmware as this issue is driving me crazy.
Please fix the DHCP issue.
I have TL-WPA8631P v3.0
Running 3.0.0 Build 20210625 Rel.42417
- Copy Link
- Report Inappropriate Content
Hello everyone,
TL-WPA8631P V3 new firmware has added the DHCP off feature on the latest firmware released in 2022.
For more information about powerline smart DHCP and the latest beta firmware, please refer to thread below:
[Solution] Powerline Extender Acting as the DHCP server
For maintain purpose, the following beta firmware will be updated on the above thread, feel free to leave your comment there if you met similar issue or the beta works for you.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2399
Replies: 9
Voters 0
No one has voted for it yet.