Changing various default settings to facilitate my WD Storage working properly

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Changing various default settings to facilitate my WD Storage working properly

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Changing various default settings to facilitate my WD Storage working properly
Changing various default settings to facilitate my WD Storage working properly
2021-01-31 12:13:05 - last edited 2021-02-01 03:31:58
Model: Archer C60  
Hardware Version: V3
Firmware Version:
  • would like to know the steps to do the following task on my router:
  •  
    1. Enable Manual port forwarding on Router.
      • The IP address to which manual port forwarding needs to be set: IP address of the NAS.
      • For internal TCP port 80, map external port 7880 and name it MBL80.
      • For internal TCP port 443, map external port 9843 and name it MBL43
      •  
      • 2) If the NAS is behind a double NAT, enable manual port forwarding on the external router2.
  •  
  • The IP address to which manual port forward needs to be set: IP address of the Router1 
  0      
  0      
#1
Options
1 Reply
Re:Changing various default settings to facilitate my WD Storage working properly
2021-02-01 06:24:45

@DeeBiz 

 

Thank you for posting on the TP-Link Community.
 

You may refer to the guide below to open those ports on the C60:

https://www.tp-link.com/support/faq/1541/

 

May this help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options