Archer AX50/AX3000 keeps disabling WiFi after reboot or turn off
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi all
Some days ago I bought a Archer AX50, however it keeps disabling the Wi-Fi sometimes when I make a reboot or when is turn off and to "wake" the Wi-Fi I either need to connect via the web console and activating the 'Enable Wireless Radio' flag.
I thought that this was because I have active the Wireless Schedule, but this configuration makes only that in the night the Wi-Fi turn off however when I rebooted at the day also keeps disabling.
My settings are:
In Wi-Fi basic settings:
2.4 Ghz Wireless: Enable Wireless Radio (this flag is not active sometimes after reboot or an turn off)
SSID1 : (not telling you :) )
Security: WPA & WPA2-Personal
Version: WPA2 PSK
Encryption: AES
Mode: 802.11 b/g/n/ax mixed
Channel: Auto
Channel width: Auto
Enable SSID Broadcast: enabled
Airtime Fairness Feature: enable
5 Ghz Wireless: Enable Wireless Radio (this flag is not active sometimes after reboot or an turn off)
SSID1 :
Security: WPA & WPA2-Personal
Version: WPA2 PSK
Encryption: AES
Mode: 802.11 b/g/n/ax mixed
Channel: Auto
Channel width: Auto
Enable SSID broadcast: Enabled
Airtime Fairness Feature: Enable
Multi-user MIMO: Enable
Wireless Schedule: Set to Enable
Wireless off time: 1:00 - 6:00 (in this time i'm not using my wifi) Repeat: Mon, Tue, Wed, Thu, Fri
Wireless off time: 2:00 - 8:00 (in this time i'm not using my wifi) Repeat: Sun, Sat
Can you help me please?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks for your reply.
By default I have only 5ghz activated.
While wifi does not work, the router in ap mode still provides internet through the ethernet ports without problem.
To answer you, I have activated 2.4 too and surprise! both work without problem being both activated.
The error then occurs with only 5ghz activated.
Do I ever remember that I also solved it with some other change in the 5ghz wifi configuration (ex: channel)
I have only noticed the problem since I have it in AP mode. (capable before it happened, but it was difficult to realize that internet was working and not wifi)
Thanks.
- Copy Link
- Report Inappropriate Content
Interesting. So there is no issue after you enabled both 2.4G and 5G network on the Archer C9? If that is the case, we suggest you try to reset the C9 to factory defaults, reconfigure it from scratch, then only enable the 5G network again to monitor if there is still an issue.
- Copy Link
- Report Inappropriate Content
It happened again, but only with a very particular configuration, which coincidentally is the one I was using.
Factory reset -> AP mode -> WIFI 2.4 off and 5ghz on with default values. IT WORKS WELL!.
Then I modify SSID and password to the one of frequent use (with a special character). It works well!
Finally I modify some 5ghz wifi configuration:
-Security Version (WPA2-PSK)
-Encryption AES
And the error occurred again (after turning off the router, when restarting, the wifi does not connect)
Thanks for your time. I hope with the data I can check to see if it is a replicable case in another router.
Regards
Marcelo.
- Copy Link
- Report Inappropriate Content
Hi Marcelo, thank you very much for all the details you've provided now. What if you change the Archer C9 to router mode, will it behave the same?
What is the detailed network layout? May I have the model number of the main router also?
On the C9, what if you leave the encryption Auto, will it work properly?
- Copy Link
- Report Inappropriate Content
Upgrade.
Changing back
-Security Version: auto
-Encryption auto
It did NOT work.
LATER:
I switched to router mode connected to the modem directly and it works fine with WPA2-PSK - AES.
Connected in AP mode, the main router is a Ubiquiti ER-X, and it is connected to the fiber optic modem, with dhcp server activated (deactivated in the Archer C9).
BUT when switching it back to AP mode, with WPA2-PSK AES it worked in the first 3 attempts. Could it be that it depends on the randomly assigned channel? (it's the only parameter that I realize is changing)
In the log the error I am getting is "LED controller", various warnings and error 934 "Config importing failes" which I don't think has binding but I mention it.
After these tests I was more confused since he did not repeat.
- Copy Link
- Report Inappropriate Content
When the C9 is working in AP mode, you may try to change its wireless channel manually to a different one, then monitor.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Model: Archer AX50
Hardware Version: V1
Firmware Version: 1.0.9 Build 20200708 rel.55037(5553)
Wow !!!! exact the same problem as mine. i thought is hardware problem and gonna sold it and wait..firmware problem causing this unpleasant experience.
Please send the solution to me as well other than downgrading the firmware. Thanks.
- Copy Link
- Report Inappropriate Content
I have exactly the same issue, with Archer AX50 in AP mode with latest firmware as above.
Is there any other solution except firmware downgrade?
- Copy Link
- Report Inappropriate Content
Are you both enabling the Reboot Schedule on the AX50? If yes, try to disable the Reboot Schedule on the router web interface, then check again if you still encounter an issue with the wireless broadcast.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 5946
Replies: 30
Voters 0
No one has voted for it yet.