Hello, Thanks for your answer. But the RE300 has not the parental control feature. Are you sure? Maybe all the traffic received by RE300 in onenesh mode is sent to the router and there parental control is applied? Can you give more detail? Thanks! Best regards,

 

TP-Link  Hello @TP-Link !

 

But I do not understand something. I have a router C6 and a repeater RE455 in repeater mode (no onemesh). And I can see the same MAC address in both, the repeater and the router. But when I apply parental control in the router to the devices connected to RE455 it does not work. 

 

If I buy a RE300 repeater and i put in onemesh mode, why parental control will work?

And why is not working right now with my RE455 repeater if i can see the same mac address of the devices connected to RE455 in the router?

 

See the attached images.

 

Repeater mode (RE455)

 

 

Repeater dhcp settings (RE455)

 

 

Repeater wifi client (RE455)

Router (C6)  DHCP table ... ¡Is the same MAC ADDRESS that the client connected via wifi to Repeater (RE455)!

 

 

If I configure parental control in the router C6 with the MAC ADDRESS 98-FE-94-93-18-B2 of this devices connected to RE455 via wifi, parental control does not work. Only works with the devices connected via wifi to the router C6.

 

 

Thanks

 

@TP-Link 

 

Hi!

 

All the mobile devices connected to the RE455 have their own MAC address. Here is an example of two mobile devices connected to RE455

 

And here is the dhcp clients list at C6. ¡The MAC are the same!

 

 

This is the hw and sw version of RE455 and C6

 

Another information 

 

The RE455 ssid and C6 ssid are different

 

 

Here is an example the parental control that does not work at C6 router

 

Thanks!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

@TP-Link 

 

Hi 

 

This is the version of RE455

 

 

 

Thanks