AC2800 2.4hz stops working
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
The 2.4ghz network periodically stops working. There are 25 devices using this network, and what is a pain is on resetting the router they don’t all come back on line. We have to power them off and back on again. Most of them are tp-link smart switches with a couple on Amazon ones.
This also happened to the same previous vr2800 which Amazon replaced after 5months.
we have 2 iPads which use the 5ghz network with no problems.
i have set the 2.4 to channel 6 instead of the default auto.
Anyone have any ideas. Someone said on another thread paying more is not always best.
dave
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thank you for posting on the TP-Link Community.
To better assist you, please provide us with the below information:
Have you updated the modem firmware to the latest, then reset and reconfigure it from scratch to confirm if the 2.4G connection will more stable?
https://www.tp-link.com/support/download/archer-vr2800/#Firmware
Try to modify the wireless settings on the VR2800, such as wireless channel and channel width to find a clear one, you may install a Wi-Fi analyzer to check which channel is clear. Change the channel width to 20MHz, security to WPA2-PSK/AES, then reboot the modem to confirm.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I'm seeing the same. Did you resolve the issue? At the moment I've been forced to disable the 2.4Ghz band totally as its so unreliable.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1069
Replies: 5
Voters 0
No one has voted for it yet.