Wifi 6 AX1500 won't reach full speed!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wifi 6 AX1500 won't reach full speed!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wifi 6 AX1500 won't reach full speed!
Wifi 6 AX1500 won't reach full speed!
2020-12-10 17:55:50
Model: Archer AX1500  
Hardware Version: V1
Firmware Version: latest

Hi

I have a TP AX1500,I can't seem to reach the max speed being thrown by the ISP modem. Our subscription is 200mbps. But when I conduct speed test while connected to TPlink, i only get 145mbps. But when I am connected to our ISP modem, i get 233mbps,I don't have any custom settings enabled and the only disabled thing under my router settings is the UPNP,I tested the speed via a cat5e and cat6 and both open below 150mbps,I also tested it wirelessly and it won't exeed 140mbps.

originally the router worked fine and achieved over 220mbps so I am assuming this has to do with the latest firmware updates!

I don't want to go back in firmware version due to security so is there anyway to work around it? thank you.

  0      
  0      
#1
Options
3 Reply
Re:Wifi 6 AX1500 won't reach full speed!
2020-12-10 18:50:58 - last edited 2022-02-12 13:05:31

Hard reset (Method 1) the router and re-configure from scratch. Test again and see if that helps.

If that doesn't help and you don't want to go back with the FW (if possible), then hopefully a new release will fix that.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Wifi 6 AX1500 won't reach full speed!
2022-02-12 04:23:51

@terziyski i am getting the same issue worst im getting only half of the main router speed.. using acher ax1500 im only getting 100mbps while using the main router its reqding 200mbps

  0  
  0  
#3
Options
Re:Wifi 6 AX1500 won't reach full speed!
2022-02-12 13:08:58

@Rey1216 

 

Follow this thread suggestions and see if that will resolve your issue.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options