Dear community, need a hand in understanding what i'm doing wrong and if my proposed network setup is or not possible. Do have a mesh network based on 3 Deco X60 satelittes. All works ok, no problem. i do have a 2 non wifi enabled devices which are in a remote area and which i was looking to connect via an old Archer C7 switch. Did try to connect via WDS, configuring the service on the Archer C7 and selecting a 2.4GHz network of one of the Deco's. Archer reports that the WDS is working, able to ping the gateway and accessing the internet. but can't ping any of them from an wifi connected device to the mesh. all devices are in the same subnet (192.168.8.x). thanks