Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Print server not accessible

< Deco

Print server not accessible

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Print server not accessible

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

jacaa

2020-12-03 08:26:38

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-12-03

Print server not accessible

2020-12-03 08:26:38

Model: Deco M4

Hardware Version: V1

Firmware Version: 1.4.3 Build 20200918 Rel. 74289

I set up a print server using OpenWRT on TL-WR842ND. Connecting a PC directly to that server through WiFI or directly through ethernet cable works perfectly (PC --- PrintServer).

But when I connect this print server to slave M4 unit via ethernet cable and having it displayed on http://tplinkdeco.net/ in Network Map (with proper name and IP address etc.), I can't reach it via web interface (when openning 192.168.68.104 in browser, I'm getting ERR_CONNECTION_REFUSED). It's still responding to ping though.

Has anyone experienced similar issue?

2 Reply

TP-Link

2020-12-03 09:42:50

Posts: 6831

Helpful: 2995

Solutions: 536

Stories: 28

Registered: 2018-07-23

Re:Print server not accessible

2020-12-03 09:42:50

@jacaa

Hi,

Thank you very much for your time and patience.

Could you please help me confirm the following information:

1. PC----<wireless and Ethernet >--TL-WR842ND(Pinter server)--printer, no problem to access the printer;

2. M4(main)---<wireless or Ethernet ?> salve M4----TL-WR842ND(Pinter server)—printer, PC could not access the printer, right?

----How is the slave deco connected to the main Deco, and is there any switch in between?

----As for the computer, did it connected to the Wi-Fi of the Deco?

----Which port on the 842ND is connected to the slave M4, WAN or LAN port?

----For the printer server 842ND this time, did it still have NAT feature, or any other special settings?

Thanks a lot.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!

jacaa

LV1

2020-12-03 10:23:33

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-12-03

Re:Print server not accessible

2020-12-03 10:23:33

@TP-Link

That's correct.
1. PC----<wireless>--TL-WR842ND(Pinter server)--printer or
2. PC----<ethernet>--TL-WR842ND(Pinter server)--printer works like a charm
M4(main)---<wireless>---TL-WR842ND---printer. I cannot connect neither to printer nor web interface of admin panel of TL-WR842ND
1. No additional switch in between
2. Computer has access to the WiFi as well as Deco - for example through http://tplinkdeco.net/
3. 842ND is connected to slave M4 via WAN port. If it matters - ethernet plug from 842ND sits in M4 slave in ethernet socket labeled as '1'.
4. No special settings - pure OOTB OpenWRT with OOTB p910nd printer server plug in installed - not a single thing was changed (except device name). I can provide other 842ND settings tab if required.
  
  Screenshot 1
  
  Screenshot 2

Print server not accessible

Print server not accessible

Information

Voters 0

Tags