Archer A7 PPoE issue
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
My router was working fine until this morning.
I've been using PPoE connectioin. But now its working in DHCP and in PPOE it doesn't connect.
I've tried to reboot. But still the issue remains.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
I contacted my ISP ACT Fibernet.
The issue is resolved now.
Based on my perusal I came to know that my issue is with DNS 1.1.1.1
When I use the dynamic DNS provided by ISP there isn't any issue.
Moreover, I had restore to factory defaults now. Which I did yesterday too.
Used 1.1.1.1 and issue started and manual change to dynamic dns by ISP also not worked.
- Copy Link
- Report Inappropriate Content
Hello, may I know who is your ISP? You are suggested to connect the ISP modem directly to a computer, try to dial up on the computer and see if you have internet access, instruction is as below:
https://www.tp-link.com/support/faq/339/
If this works fine, then connect the ISP modem back to the A7 WAN port, input the PPPoE username and password on the WAN page again, ensure the cable between the ISP modem and the A7 is good.
- Copy Link
- Report Inappropriate Content
Hi,
I contacted my ISP ACT Fibernet.
The issue is resolved now.
Based on my perusal I came to know that my issue is with DNS 1.1.1.1
When I use the dynamic DNS provided by ISP there isn't any issue.
Moreover, I had restore to factory defaults now. Which I did yesterday too.
Used 1.1.1.1 and issue started and manual change to dynamic dns by ISP also not worked.
- Copy Link
- Report Inappropriate Content
Hi, glad to hear that it works, congrats.^_^
If need any further help, just let us know.
Good day~
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 614
Replies: 3
Voters 0
No one has voted for it yet.