@TP-Link 

 

Hi, I have TL-WPA8631P kit, composed by TL-WPA8631p and TL-PA8010p.

 

Before upgrading firmware it worked well, it was detected and I could connect and setup it, no problem.

 

I do also have 2 more TL-PA8010p.

 

Screen capture of 3 of the TL-PA8010p:

 

 

Now, when adding the upgraded TL-WPA8631p it doesn't appear automatically, but if I add it by poweline key, it is added:

 

 

As you can see, it is detected that there's wifi | 1200 Mbps, but I remember seein more options. When clicking on advanced, firmware, it asks for 2 files, when the firmware is a .bin file. Firmware upgrade process was done with no interruptions nor errors.

 

Version indication is:

 

 

And that's the file I used for the upgrade:

 

 

When I connect the TL-WPA8631p to the power socket, same power line, it blinks leds 1,3,4,5 during 3 seconds (aprox) repeatedly. I tried to connect a network cable to see if it gives connectivity, but it is on/off every 3 seconds too.

 

So, somehow it is 'working', it's not a brick, but doesn't do anything else than blinking. 

 

Any idea would be welcomed.

 

Thank you!

 

 

@TP-Link Have you had any chance to review?

 

Thank you.

@TP-Link 

 

Good morning.

 

I do confirm points 1 to 4.

 

Currently is NOT giving any internet or way to directly communicate with it, only way I can see it is wit the TPLink Tool. I have checked my router to see if it gets any IP (checking my Mac address) and then I can web connect to it, but no IP assigend. I don't know if there's a way to get the web interface.

 

At this moment the device is not usable.

 

Thank you.

@TP-Link 

 

Hi, any update? If it's a problem that can not be solved quickly I would return the device and claim for a new one to supplier.

 

Thanks!

@TP-Link 

 

Thank you anyway for the answer and time, I will proceed to return de pack.