@Kevin_Z Finallyyyyyy!! Works Flawlessly thank you very much 😍 

@Artcland 

For ppl who have the message "developer not verified---move to trash" it could be solved by writing this command on Terminal WITHOUT PRESSING ENTER

xattr -cr 

be sure there is one space after -cr and drop the app on the Terminal window

you should see something like this 

xattr -cr /path/to/application.app

now press Return (Enter)

If requested type your admin password and press enter again (it seems you aren't writing anything but don't worry press enter after the password and it will work. PLEASE NOTE: if you don't use a password and the Terminal asks it, you have to set an admin password in System Preferences, reboot the pc and do this action from the beginning)

@Kevin_Z 

Thanks for all your work on this guys and providing these new drivers.

I have Archer C7 and successfully managed to install the new USB Printer Controller app.  My printer was found without any issues (see attached screenshot).  However, I don't see any printers available in my macOS system.  I've tried adding the printer both as a local printer and as a network printer using the IP address shown in the USB Printer Controller app.

I am running the latest BigSur version, v. 11.2.3.

What am I missing?

@Kevin_Z 

Yes, I can print when connecting the printer directly -- that's how I've always done it.  The second I connect my printer directly via USB, it shows up.  I can also see it in Brother Status Monitor app -- see below.

@Kevin_Z

Yes, am able to find the printer on the controller.

And, i try adding the printer:

However, am unable to add the printer

However, the printer shows up when i login router.

Yes, am able to print, when the printer is directly connected to the Mac.