Cannot connect to router with tether

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cannot connect to router with tether

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cannot connect to router with tether
Cannot connect to router with tether
2020-10-31 14:27:12 - last edited 2020-11-02 03:45:53
Model: Archer C2600  
Hardware Version: V1
Firmware Version: ?

Cannot connect to router with tether on ipad despite reboot and being very close.

Would like to configure with better security if possible. WPA2 (AES) or WPA3 which is suggested by ipad.

Grateful for help.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Cannot connect to router with tether-Solution
2020-11-02 03:45:49 - last edited 2020-11-02 03:45:53

@Klaus77 

 

Hello, please check the following info if Tether failed to log in TP-Link device:
1. Make sure it is the correct login username/password (admin/admin in default settings and this might be changed by yourself; if the TP-Link device is bound to a TP-Link ID, please check it as well). The username/password is the same as your login credentials for the web management page.
2. Make sure the TP-Link device is using the latest firmware.
3. Ensure it is in Router or Access Point mode.
4. Reboot the TP-Link device or restart the Tether app.
5. If the username/password is forgotten, please reset the device manually and use the default login credentials (admin/admin).

 

BTW, you can also login to the router web GUI to change the wireless security, you may change it to WPA2-PSK/AES:

https://www.tp-link.com/support/faq/2215/

 

May this help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Cannot connect to router with tether-Solution
2020-11-02 03:45:49 - last edited 2020-11-02 03:45:53

@Klaus77 

 

Hello, please check the following info if Tether failed to log in TP-Link device:
1. Make sure it is the correct login username/password (admin/admin in default settings and this might be changed by yourself; if the TP-Link device is bound to a TP-Link ID, please check it as well). The username/password is the same as your login credentials for the web management page.
2. Make sure the TP-Link device is using the latest firmware.
3. Ensure it is in Router or Access Point mode.
4. Reboot the TP-Link device or restart the Tether app.
5. If the username/password is forgotten, please reset the device manually and use the default login credentials (admin/admin).

 

BTW, you can also login to the router web GUI to change the wireless security, you may change it to WPA2-PSK/AES:

https://www.tp-link.com/support/faq/2215/

 

May this help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options