XIAOMI Redmo note 8T cannot connect wireless to AX20
Hello,
I bought a new router AX20.
All works OK, but only one of my mobile phone (XIAOMI Redmi Note 8T) cannot connect to internet.
On profile of my WiFi network on mobile I see only status "saved", but cannot switch to status "connected".
When I try to connect to quest network, mobile phone is connected without problems.
Mobile phone is updated to the latest version...
Can You help me to solve this problem ?
Best regards,
MD
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thx for info, it helped me.
I tried to change security setting on my WiFi network, and now it is OK, mobile can connect to the router on main network without problem.
I changed this setting:
Error setting:
Security: WPA/WPA2-Personal
Version: WPA2-PSK
Encryption: AES
Good setting:
Security: WPA2/WPA3-Personal
Version: Auto
Best regards, MD
- Copy Link
- Report Inappropriate Content
I don't know if it's related in any way, but I can tell you that in my household we have a Xiaomi Mi A2 phone (Android 10) that can't connect to my AX50 router if I allow only WPA2-PSK-AES as WiFi security. (which I would prefer to do)
That Xiaomi Mi A2 will only connect to the AX50 router if I also allow the old WPA WiFi security in addition to WPA2.
- Copy Link
- Report Inappropriate Content
Thx for info, it helped me.
I tried to change security setting on my WiFi network, and now it is OK, mobile can connect to the router on main network without problem.
I changed this setting:
Error setting:
Security: WPA/WPA2-Personal
Version: WPA2-PSK
Encryption: AES
Good setting:
Security: WPA2/WPA3-Personal
Version: Auto
Best regards, MD
- Copy Link
- Report Inappropriate Content
My redmi note 7 is not connections to my wifi ax 1500 to link after upgrading the firmware pls help me step by step I m not a technical guy I m using guest ssid
- Copy Link
- Report Inappropriate Content
@Yadav1986r change security settings like above to WPA2/WPA3 on router
- Copy Link
- Report Inappropriate Content
@woozle Thx its work for me.
- Copy Link
- Report Inappropriate Content
It seems that on my Ax10 I don't have the WPA2/WPA3-Personal option available. What are my options?
- Copy Link
- Report Inappropriate Content
Hi,
If the option "Versiune" is currently set to "WPA2-PSK", then change it to "Auto" and check if that makes any difference.
- Copy Link
- Report Inappropriate Content
Thanks so much, @woozle!
The version setting was the only thing I overlooked. Ultimately, apart from the "no security" option, this is the only combination of settings that seems to work!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 3746
Replies: 8