TL-WR702N not connecting to internet in client mode anymore
Hi everyone. I read several similar topics but I couldn't get any solution working for me. I hope someone can help me with the right path.
I have an old TV and I was using TL-WR702N in client mode to get the TV connected to internet. I had plugged TL-WR702N out for some days for some reason. Now it is not connecting to internet anymore. I tried to setup it again without any luck. I have updated firmware, it didn't work.
My root AP is Huawei HG255S. Not sure where to start because I tried the guidelines on the web and the comments in this forum. I am lost in discussions (static ip or not, dhcp on or off, sometimes it is not possible to reconnect to TL-WR702N when I follow the recommended tcp/ip settings, etc.).
Can someone guide me step by step if I share the required information and results please?
What I see with ipconfig in cmd now:
IPv4 address: 192.168.1.42 (preffered)
Default gateway: 192.168.1.1
DHCP server: 192.168.1.1
In TL-WR702N page:
IP adress: 192.168.0.254
Wireless mode: client mode
(I clicked to connect to wifi by survey button and choosing the network.)
Network-LAN: smart ip (dhcp)
DHCP enable is clicked but all buttons are grey
Thank you in advance.