Home Network Community > Range Extenders > Can I connect AC1200 from TL-PA9020P
< Range Extenders

Can I connect AC1200 from TL-PA9020P

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can I connect AC1200 from TL-PA9020P

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can I connect AC1200 from TL-PA9020P
Can I connect AC1200 from TL-PA9020P
2020-10-01 09:26:17 - last edited 2020-10-02 07:01:04

I was wondering if it is possible to configure a AC1200 as just an WiFi access point by Ethernet connecting it to an "Ethernet over Power" TL-PA9020P to the Router.
What I really want to do is turn off my router's WiFi connection and use only my router's Ethernet to my AC1200.
In order to reach the location of the AC1200, I would need to use a Kit of Ethernet over Power TL-PA9020P.
Is this configuration possible?
The connections are:
Router <-Ethernet-> TL-PA9020P <-AC Power line-> TL-PA9020P <-Ethernet-> AC1200 (WiFi)
Note: the extra benefit would also allow me to physically move the AC1200 where ever I want it.
 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Can I connect AC1200 from TL-PA9020P -Solution
2020-10-02 06:59:21 - last edited 2020-10-02 07:01:04

@Knight_Owl 
Well I figured it out myself.
All you need to do is access the AC1200 on your network, if it was already setup as a WiFi Extender, from your router.
Just type in the IP address that the AC1200 is on your router and you are there, then supply password.
You can then change the mode from extender to Access point.  Make sure to connect the AC1200 Ethernet port to your router.
Reboot the AC1200.  Wait a bit and maybe unplug and re-plug the Ethernet cable.
I then turned off the WiFi on my router to test out that I truly have everything working through the Ethernet cable to the Access point.
All the cloning WiFi settings while the AC1200 was a WiFi extender are still there.

By the way, the AC1200 was connected to the Ethernet port of the 'Ethernet over power line' TP-PA9020P while I did the changes with no hiccup.


 

Recommended Solution
  2  
  2  
#2
Options
1 Reply
Re:Can I connect AC1200 from TL-PA9020P -Solution
2020-10-02 06:59:21 - last edited 2020-10-02 07:01:04

@Knight_Owl 
Well I figured it out myself.
All you need to do is access the AC1200 on your network, if it was already setup as a WiFi Extender, from your router.
Just type in the IP address that the AC1200 is on your router and you are there, then supply password.
You can then change the mode from extender to Access point.  Make sure to connect the AC1200 Ethernet port to your router.
Reboot the AC1200.  Wait a bit and maybe unplug and re-plug the Ethernet cable.
I then turned off the WiFi on my router to test out that I truly have everything working through the Ethernet cable to the Access point.
All the cloning WiFi settings while the AC1200 was a WiFi extender are still there.

By the way, the AC1200 was connected to the Ethernet port of the 'Ethernet over power line' TP-PA9020P while I did the changes with no hiccup.


 

Recommended Solution
  2  
  2  
#2
Options

Information

Helpful: 0

Views: 540

Replies: 1

Related Articles
 TL-PA9020P vs TL-PA9020
2434 0
 Tl-pa9020p
601 0
What powerline adapters can I use with TL-PA9020P?
851 0
TL-PA9020P randomly drop connection
1716 0
How to Extend Network ? - TL-PA9020P KIT -
1120 0
Why TL-PA9020P shall be installed vertically?
742 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.