go to the "Advanced" tab on top go to "NETWORK" then "Internet" on the side go to the "advanced" sub menu

@CHIBOMAN can pldt users also do this?

@Kevin_Z 

Hello 

My ISP is PLDT Fibr 25 Mbps and we are planning to upgrade to 100 Mbps

When the internet drops the internet LED turns into orange (i must unplug and replug to get the green light again but after few hours same problem)

i have tried changing the cat5e and cat6 cable several time with a new one still the same

i tried reseting the modem and still i get the same problem 

(this problem came up after i updated the firm ware to 1.0.9 my friend who has the same router has the firm ware 1.0.8 doesnt have this problem.)

Please help me with this problem because it is hard for us to work properly due to this we are currently in WFH situation.

Thank you

@Loading.... @Kevin_Z 

Encountering the same problem on PLDT Home Fibr 100mbps and Archer AX50 v1. My problem started when my firmware was still 1.0.8.

Posted on this yesterday as well, but I'll post here also for reference:

"For the past 3 days, I have been experiencing recurrent (every few hours) disconnection of the WAN of the router with the LED indicator for WAN turning orange, despite the functional internet connection on computers directly connected to the ISP modem-router. I have not needed to reboot the modem, just the router, to restore the connection. However, I have tried rebooting both the router and modem as well but it hasn't helped.

The router was purchased just last August, and had been working well before, This issue was first encountered after I enabled the reboot schedule last Saturday (Sept 19), which I set to 4AM on Sunday. I've already disabled this feature, but the issue persists.

I have already updated the firmware to 1.0.9 since the issue started, and have tried the community recommendation to clone the MAC address of this computer that I had connected directly to the modem-router, but neither have helped.

Each time this happens, system log of the router says 3 things, all "Type: Led Controller" and "Level: Info":
1 - [1413] Start to run LAN_ON
2 - [1413] Start to run WAN0_OFF
3 - {1413} Start to run WAN1_ON

I'm attaching a screenshot here for reference. Please note that the system time was not updated until the last reboot."

Also, I've tried the recommendation to switch the negotiation speed from auto to manual select (1000 mbps full duplex), but it hasn't helped either. I've lost the connection at least an additional 5 times since I changed the negotiation speed manually.

Will monitor this thread for progress and recommendations. Thank you!

@Kevin_Z 

solved the problem, thank you tp-link support.

@mac13 @Kevin_Z 

What is the solution? I have the same issue, nearly daily, which is troubling with our new work from home and learn from home scenarios. 

The router loses connection to the modem and the LED is orange. Waiting and rebooting both systems is the only solution, daily. 

I am very close to simply chalking it up as a loss and buying a new router. 

Firmware version: 1.0.9 Build 20200708 rel.55037(5553)

Hardware version Archer AX50 v.1.0