Home Network Community > DSL Modem Routers > Losing connectivity to TP-Link td-w9960a after power switching always for around 15 minutes
< DSL Modem Routers

Losing connectivity to TP-Link td-w9960a after power switching always for around 15 minutes

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Losing connectivity to TP-Link td-w9960a after power switching always for around 15 minutes

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Losing connectivity to TP-Link td-w9960a after power switching always for around 15 minutes
Losing connectivity to TP-Link td-w9960a after power switching always for around 15 minutes
2020-09-14 08:56:09 - last edited 2020-09-16 10:56:40
Model: TD-W9960  
Hardware Version: V1
Firmware Version: 1.0

My DSL modem is connected to UPS power. when my home power switches between too power sources, the modem stays, all Leds stay green (power, DSL, Wifi and internet). however i lose connectivity to from my Laptop and my mobile to the modem. the connection stay visible however the mobile tries to connect and end with saved stated. The laptop stays not able to connect.

Appreciate if someone can help.

 

 

Thank you

Best Regards

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Losing connectivity to TP-Link td-w9960a after power switching always for around 15 minutes-Solution
2020-09-16 10:56:34 - last edited 2020-09-16 10:56:40

@User1986 

Good day.

Thank you very much for your time and patience.

For your case, we might need your help to check the following details:

  1. When the TD-W9960 dropped connection, all the devices could still see the Wi-Fi network, but not able to get connected, right?
  2. What did you need to do to recover the connection or would it come back automatically?
  3. Did you have any wired laptop which connected to 9960 via Ethernet cable? And would it have any connection and get an IP address from 9960?
  4. Are you able to log into the 9960 when the connection dropped? If yes, please help me save the system log and advanced>status page on the 9960;

Thank you very much.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Losing connectivity to TP-Link td-w9960a after power switching always for around 15 minutes-Solution
2020-09-16 10:56:34 - last edited 2020-09-16 10:56:40

@User1986 

Good day.

Thank you very much for your time and patience.

For your case, we might need your help to check the following details:

  1. When the TD-W9960 dropped connection, all the devices could still see the Wi-Fi network, but not able to get connected, right?
  2. What did you need to do to recover the connection or would it come back automatically?
  3. Did you have any wired laptop which connected to 9960 via Ethernet cable? And would it have any connection and get an IP address from 9960?
  4. Are you able to log into the 9960 when the connection dropped? If yes, please help me save the system log and advanced>status page on the 9960;

Thank you very much.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Losing connectivity to TP-Link td-w9960a after power switching always for around 15 minutes
2020-09-25 12:32:39

@Sunshine 

Good day.

 

Please find inline my answers in red

 

Thank you very much for your time and patience.

For your case, we might need your help to check the following details:

 

  1. When the TD-W9960 dropped connection, all the devices could still see the Wi-Fi network, but not able to get connected, right? yes right
  2. What did you need to do to recover the connection or would it come back automatically? i should wait 15-20 minutes or turn off turn on device to speed up connection recovery.
  3. Did you have any wired laptop which connected to 9960 via Ethernet cable? No. And would it have any connection and get an IP address from 9960? I tried it, no also not able to get an IP.
  4. Are you able to log into the 9960 when the connection dropped? I tried it and no i can't If yes, please help me save the system log and advanced>status page on the 9960;

Thank you very much.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 704

Replies: 2

Related Articles
 TD-W9960A IPv6 SPI Firewall is useless and blocks every thing with no exception
862 0
 TD-W9960 V1.20 - TP-Link led blinking issue
1154 0
TP-LInk Wi-Fi on iPhone and other Apple devices losing Internet connectivity.
49087 30
TD-W9960 latest update error
1296 0
TD 9960 slow Upstream rate
468 0
td-w99960 port forwarding only if used another network .
685 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.