Home Network Community > Wi-Fi Routers > TP LINK W8970 - port forwarding advise
< Wi-Fi Routers

TP LINK W8970 - port forwarding advise

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP LINK W8970 - port forwarding advise

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP LINK W8970 - port forwarding advise
TP LINK W8970 - port forwarding advise
2013-02-07 02:26:28
Region : UnitedKingdom

Model : TL-WR1043ND

Hardware Version : V1

Firmware Version : 0.6.0 0.11 v000c.0

ISP : O2

Can anyone advise how to port forward in the TP-Link w8970 please? I've been trying to port forward a couple of Foscam CCTV cameras without any success. I've entered all the necessary information into the Virtual Server screen as follows:

Service port: #### (the camera's port)
IP address :##.##.##.## (the camera's internal IP address)
Protocol: TCP or UDP
Status: Enabled
WAN: ipoe_0_101_0_d


Can someone please explain where I've gone wrong?

Many thanks.
  0      
 
  0      
 
#1
Options
6 Reply
Re:TP LINK W8970 - port forwarding advise
2013-02-07 03:10:38
In local network camera works ok? TP-Link w8970 is it only one router in network?
  0  
  0  
#2
Options
Re:TP LINK W8970 - port forwarding advise
2013-02-07 17:40:58
Camera is working on local area network. Tp link w8970 is only router on network.

I have also tried canyouseeme.org and it can see the port is open and working.

Cannot understand what more I need to do?
  0  
  0  
#3
Options
Re:TP LINK W8970 - port forwarding advise
2013-02-07 18:09:27
Do I need to do something in Port Triggering or Firewall Rules?
  0  
  0  
#4
Options
Re:TP LINK W8970 - port forwarding advise
2013-02-07 19:23:58
I've just realised what's going wrong - the tp link w8970 doesn't support NAT loopback!!! It works fine outside of my local network, but not obviously inside unless I use the internal ip address.

Does anyone know how to overcome NAT loopback problems on TP-Link routers please?
  0  
  0  
#5
Options
Re:TP LINK W8970 - port forwarding advise
2013-02-07 23:56:45
In local area you can use local IP.
  0  
  0  
#6
Options
Re:TP LINK W8970 - port forwarding advise
2013-02-08 00:42:23
Yes Jimasek. I can also see it outside, but I have to use the external IP address.

This is my first router that doesn't have NAT loopback. I hope there is a way to solve this loopback issue.

But I'm fine now. I will just have to use to sets of IP addresses for each camera.
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 849

Replies: 6

Related Articles
TP-link Archer MR600 Port forwarding not possible
8373 0
 Port forwarding from Archer C9 to W8970
606 0
 TD-W8970 Port Forwarding Problem
1166 0
 TP LINK 5250 port forwarding
455 0
 TP LINK 5250 port forwarding
604 0
TP-Link Archer C80 firmware suggestion - port forwarding
2669 2
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.