Home Network Community > DSL Modem Routers > VR600 Slow speed on 5Ghz new firmware
< DSL Modem Routers

VR600 Slow speed on 5Ghz new firmware

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VR600 Slow speed on 5Ghz new firmware

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VR600 Slow speed on 5Ghz new firmware
VR600 Slow speed on 5Ghz new firmware
2020-08-09 14:10:57 - last edited 2020-08-09 15:15:33
Model: Archer VR600  
Hardware Version: V2
Firmware Version: 0.4.0 0.9.1 v0074.0 Build 200701 Beta.71362n

Hi has anyone else noticed that the latest Firmware Version:0.4.0 0.9.1 v0074.0 Build 200701 Beta.71362n slows down the throughtput on wifi 5ghz.

 

I have tried changing the channels and made no difference. its been fine prior to the updgrade the speed appears to be capped at 48mpbs despite havng a faster connection and not noticed any issues before only since the update.

 

I have tested it on Lan and the speed is as expected its just on Wi-Fi

 

Firmware Version:0.4.0 0.9.1 v0074.0 Build 200701 Beta.71362n Hardware Version:Archer VR600 v2 00000000
 

 

Thanks 

  0      
 
  0      
 
#1
Options
7 Reply
Re:VR600 Slow speed on 5Ghz new firmware
2020-08-10 01:52:52

@steven0151 

Good Day,

Thank you very much for your feedback.

For your case, could you please help us check the following information:

  1. Except for the 5ghz, the 2.4ghz, and wired Ethernet connection are so far so good, right?
  2. May I know how much speed you are supposed to get from 5ghz? And how about the speed of  4ghz and Ethernet connection as well?
  3. Who is your internet service provider and can I have a picture of the status page?
  5. Could you please also check the link speed on the device when it is connected to the 5ghz? https://www.tp-link.com/support/faq/2265/

Thank you~

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:VR600 Slow speed on 5Ghz new firmware
2020-08-10 06:46:59 - last edited 2020-08-10 07:01:26

@Sunshine 

 

Hi I have attached a picutre and a PDF of the router stats. The sync speed on 5ghz and its 868mbps but the speed when running speed tests does not go above 49mbps this is the same on other both windows and Macbook. the ISP is TalkTalk (UK) and when connected by LAN the speed is around 59mbps and prior to the firmware update both LAN and Wifi would get around 59-60mbps. its only since the firmware update the speed will not go about 49mbps. 

 

I have had the VR600 for a couple of years and I have good knowledge of the VR600 and the issue has only appeared since the firmware upgrade. I am thinking of going back to the previous version as the latest fimware doesnt appear to work as good.

 

The firmware also states beta and was downloaded from here https://www.tp-link.com/uk/support/download/archer-vr600/#Firmware 

 

Thanks 

 

File:
Archer VR600.pdfDownload
  0  
  0  
#3
Options
Re:VR600 Slow speed on 5Ghz new firmware
2020-08-14 02:51:39

@steven0151 

Good day.

Thank you very much for your detailed information.

Recently, we got some feedback about our new firmware and our engineers are working on it.

For further updated news, please keep attention to our official website.

Your cooperation is highly appreciated.

Thanks a lot.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  1  
  1  
#4
Options
Re:VR600 Slow speed on 5Ghz new firmware
2020-08-14 06:56:30 - last edited 2020-08-14 06:57:48

@Sunshine Thank you for the update.

 

Are you aware that the on the UK website https://www.tp-link.com/uk/support/download/archer-vr600/#Firmware the firmware is a beta version ? This is not good service from TP-Link especally when the website states "This firmware has enhanced the performance and it's recommended to upgrade to this firmware for better experience" 

 

My experaince has got worse not better using the latest Beta firmware!
 

 

 

  0  
  0  
#5
Options
Re:VR600 Slow speed on 5Ghz new firmware
2020-08-18 02:13:25

@steven0151 

Good day!

Sorry for the delay.

Have you set up the QoS on the modem before?

And may I know if all the 5ghz compatible devices are up to 49m/s on the 5ghz of VR600?

Later we might need to forward your case to our engineers for further help and please check your message box.

Thank you!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#6
Options
Re:VR600 Slow speed on 5Ghz new firmware
2020-08-18 07:09:37

@Sunshine Thank you I will respond to your message

  0  
  0  
#7
Options
Re:VR600 Slow speed on 5Ghz new firmware
2020-09-25 17:35:39

@steven0151 i have some issue after update last Firmware 

 

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 2525

Replies: 7

Related Articles
Slow Wireless speed on VR600 V2
3200 1
 TPLINK VR600 V2 NEW Firmware or New Beta Firmware
1428 3
 The new Firmware of vr600 ac2100 v3
1237 0
Archer VR600 v2 LAN speed
1326 0
AX1500 - slow speed on 5Ghz
2138 1
 vr600 wifi 5ghz link speed is 304.2 mbps not 1300
730 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.