Deco X60 port Forwarding issue
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I just bought Deco X60 pack of 3 a week ago. While setting up port forwarding I found this issue.
https://youtu.be/TuA-k4__L1Y
So far the only workaround I was able to find set ip of the device I need to forward in range of 192.168.0.1/24.
My network settings are 
Range: 192.168.0.1/22
Subnet: 255.255.252.0
Gateway: 192.168.0.1
Deco is setup in router mode and as DHCP server.
I was only able to test this issue on android app as I don't own any iOS devices.
Please suggest changes if I have made any configuration errors.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, thanks for reporting this issue to the community.
We will soon confirm this issue and get back to you via email, please check your email box and respond, thanks.
- Copy Link
- Report Inappropriate Content
100% the same probleem here!
i want to forward my NAS ports. Nas on 192.168.1.5 and it keeps changing back to 192.168.0.5.
please solve this bug a.s.a.p. And keep us informed.
a manual advanced login to bypass the app would also be ok.
best regards,
marcel
- Copy Link
- Report Inappropriate Content
Temporary solution which I used was to change the ip of the device with need of port forwarding to 192.168.0.x
- Copy Link
- Report Inappropriate Content
Thank you both, we are investigating this issue and will get back here ASAP.
Good days.
- Copy Link
- Report Inappropriate Content
Yep. Already thought of that.
But I don't want to do that because of several fixed ip participants like my nas, ip cams, alarm system and printer.
I hope there will be a bugfix soon.
@TP-Link_Deco, would a firmware downgrade be a solution for now? If so, where can I download it?
And do I then have other challenges?
Greetings from the Netherlands
- Copy Link
- Report Inappropriate Content
I have found a solution yesterday. With the IP address settings, you need to adjust/adapt the Subnet.
So now I have 255.255.255.0 instead of 255.255.252.0. It has been a long time ago when I was calculating subnets, not sure if this is bug or it was "our failure".
At the end, everything works over here!
- Copy Link
- Report Inappropriate Content
Router IP: 192.168.122.254
Subnet: 255.255.0.0
PortForwarding to 192.168.123.55
After saving, it indicates forwarding to: 192.168.0.55
Not OK!
- Copy Link
- Report Inappropriate Content
Almost November and this is still an issue. Please fix this.
- Copy Link
- Report Inappropriate Content
@Philip_DN Check my feedback on the subnet mask. This works for me. So 255.255.255.0
- Copy Link
- Report Inappropriate Content
Check my feedback on the subnet mask. This works for me. So 255.255.255.0
https://docs.microsoft.com/en-us/troubleshoot/windows-client/networking/tcpip-addressing-and-subnetting#:~:text=A%20subnet%20mask%20is%20used,see%20how%20it%20is%20organized might give detailed reasons ;)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 6080
Replies: 25
Voters 1
