Hidden network problem Archer A7 V5.0
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
The problem is next, the router generates a hidden network signal, even though the ssid is not hidden.
I use 2.4ghz, the transmission speed is also poor.
If I turn off the router, the hidden network also disappears.
I couldn't find an option to turn it off on the website.
Has anyone experienced this before, and if so, how can it be eliminated?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @FL1XxY and anyone who wants to disable the Onemesh hidden network on the TP-Link router, please refer to this thread we've updated to find a solution:
- Copy Link
- Report Inappropriate Content
Hello @FL1XxY and anyone who wants to disable the Onemesh hidden network on the TP-Link router, please refer to this thread we've updated to find a solution:
- Copy Link
- Report Inappropriate Content
Thank you so much for your help and quick response!
We are waiting for the new software with the fix!
- Copy Link
- Report Inappropriate Content
Kevin_Z wrote
The good news is that we already have the plan to add an Onemesh on/off switch on the firmware, which will allow you to turn it off manually. This will take some time, however, we hope you could wait patiently.
Hi Kevin, I have a new TP-Link-router, namely Archer C2300 v2.0. Unfortenately I also see a hidden network in this router. It must be, I think, destinated for Onemesh. But I don't use Onemesh and I have no plans to do so. So I hope the on/off-switch will come very soon, maybe this week ?? I should be very glad.
By the way I installed on 14 November (last week) firmware 1.1.1 Build 20200918 rel. 67850. Is this firmware correct for the AC2300 v2.0 ? Why do I ask ? Because on the site of TP-Link this firmware is not mentioned (yet ?).
I look forward to your reactions, greetings, Pieter75
- Copy Link
- Report Inappropriate Content
Hello, thanks for bringing this up again.
Yes, this 1.1.1 Build 20200918 rel. 67850 is the latest firmware for the C2300(EU) 2.0, so no worries, it will be published on the local website soon, please check it later.
BTW, the C2300 doesn't support Onemesh actually, so I am wandering is that hidden network belongs to it? You may check if you have enabled the Guest Network on it, and it is suggested to confirm as well if that is actually others' network.
Thanks.
- Copy Link
- Report Inappropriate Content
i have Archer vr2100.. when tp-link is going to release the firmware which has Onemesh on/off switch so the hidden network can be turned off ?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1560
Replies: 5
Voters 0
No one has voted for it yet.