Using Deco app on new phone
Hi all,
My TP link deco wifi has already been set up previously.
I have bought a new phone and installed the app but when I log in I cannot see the connected device.
It prompts me to set up the system again which I actually tried to do but failed.
Has anyone any advice?
Do I need to keep trying to set up the system, like it's a new install OR is there a way I can get my already connected system, recognised on the app?
Many thanks 😀
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, yes and you need to make sure that you have logged into the same email account on the new phone;
--if you have already done that and it still required a new setup, please leave me a private message with the following information:
1. your TP-Link ID for the Deco;
2. the MAC address of the main Deco;
Thank you very much.
- Copy Link
- Report Inappropriate Content
Hello, please check below if you cannot find the M4 when logged in on another phone:
1. Check if you've logged in the correct cloud account which your Deco M4s linked to. Try to log out and log in again.
2. On the top-middle of the Deco app, please check if you can see any Deco network you've created on the previous phone.
3. Reboot the Deco network, and then connect the phone to the main Deco's Wi-Fi network.
4. Try with another phone.
Thanks.
- Copy Link
- Report Inappropriate Content
Did you get your new phone to work with old setup?
Have the same problem with my new phone.
- Copy Link
- Report Inappropriate Content
Hi, yes and you need to make sure that you have logged into the same email account on the new phone;
--if you have already done that and it still required a new setup, please leave me a private message with the following information:
1. your TP-Link ID for the Deco;
2. the MAC address of the main Deco;
Thank you very much.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 5736
Replies: 4
Voters 0
No one has voted for it yet.