Deco E4 backhaul issues
All Deco are connected via ethernet to the modem of the ISP, which has 4 LAN ports.
DHCP Server and Wifi of the modem is turned off or disabled.
Setup of Deco:
Deco 1 - Ground Floor (where the modem is located)
Deco 2 - 2nd Floor Bedroom (just above where the modem and Deco 1 is located)
Deco 3 - 3rd Floor
Backhaul
Deco 1 - directly connected to the modem via ethernet, is the Main Deco
Deco 2 - directly connected to the modem via ethernet, signal source is Deco 1 on wifi backhaul
Deco 3 - directly connected to the modem via ethernet, signal source is Deco 2 on ethernet backhaul
On the app, it loads slow, I have adequate 35 Mbps (download and upload speed) of fiber internet, so it seems that the app needs further improvement. Implement GUI based configuration if internet is unavailable, this is for troubleshooting and diagnostics purposes. Also allow multi-login, if one owner and one manager is using the app at the same time.
ISSUE:
Why is Deco 2 connected on wifi backhaul instead of ethernet backhaul when its LAN port is connected?
Why is Deco 3 connected on Deco 2 if Deco 1 is the Main Deco unit?
All 3 LAN port of the modem where the Deco units are connected is blinking, indicating the ethernet of the Deco units are working.
Why is the app does not sync in real-time? It has a really big delay.
I would really like to use ethernet as the main backhaul to all of my Deco units.