VPN server connection issue
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hopefully somebody can help, many thanks in advance.
I had set up an OpenVPN server running on my C3150 v2. This was working fine for a few weeks.
At one point I was testing something and wanted to connect my local PC to my my VPN connection ie PC allready connected to C3150.
I normally did this by disconnecting the PC from C3150 and running the connection through my mobile phone. Which worked fine.
However this time I forgot to disconnect from C3150 and attempted a connection.
Ever since then I could not connect to my VPN from any device. Server just wasnt working any more.
I tryed
-erasing all settings and setting up again
-upgrading firmware
-factory restore
No matter what I do VPN server will not allow connections. Both, openVPN and PPTP
I can ping my router IP and tplinkdns but all connections fail.
I wonder if there is some setting that got screwed up by me trying to establish a connection from LAN and it is not clearing with all the resets I tryed
Thanks
Igor
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, thanks for reporting this issue.
Please help verify some details and we will try to figure it out:
1. Kindly check the below VPN setup instructions again to confirm all the settings on the AX6000 are correct:
How to use OpenVPN to access your home network through the Wi-Fi Routers
BTW, please also provide us your network topology.
2. Please check the VPN Tunnel: login the web interface, and on the VPN Server-> VPN Connections, we can see the status of the VPN Server, confirm if there is a VPN connection enabled. If not, which means the VPN setup is not successful.
3. Check the Firewall and Anti-Virus software on the server: generally, Windows Firewall would block the packages from the VPN Client, disabling the firewall on Windows PC for "public" and "private" network will be helpful. Windows Firewall is located at "Control panel->System and Security->Windows Firewall/Windows Defender Firewall".
- Copy Link
- Report Inappropriate Content
Hi Kevin,
VPN is set up properly.
I have already tried disabling AV and firewall. That didn't work. The connection always times out. I don't know why that happens given I can ping both my ip and tplink dns.
I checked with my ISP, they are not blocking VPN ports.
This is the log from openVPN on my phone
3:39 PM (1 minute ago)
to Igorbozalo
15:38:18.529 -- ----- OpenVPN Start -----
15:38:18.530 -- EVENT: CORE_THREAD_ACTIVE
15:38:18.533 -- OpenVPN core 3.git::f225fcd0:Release android arm64 64-bit PT_PROXY built on Mar 3 2020 21:07:24
15:38:18.533 -- Frame=512/2048/512 mssfix-ctrl=1250
15:38:18.534 -- UNUSED OPTIONS
4 [nobind]
7 [resolv-retry] [infinite]
8 [persist-key]
9 [persist-tun]
10 [verb] [3]
15:38:18.534 -- EVENT: RESOLVE
15:38:18.558 -- Contacting 180.150.xx.xxx:1194 via UDP
15:38:18.559 -- EVENT: WAIT
15:38:18.562 -- Connecting to [xxxx.tplinkdns.com]:1194 (180.150.xx.xxx) via UDPv4
15:38:28.533 -- Server poll timeout, trying next remote entry...
15:38:28.535 -- EVENT: RECONNECTING
15:38:28.539 -- EVENT: RESOLVE
15:38:28.556 -- Contacting 180.150.xx.xxx:1194 via UDP
15:38:28.557 -- EVENT: WAIT
15:38:28.564 -- Connecting to [xxxx.tplinkdns.com]:1194 (180.150.xx.xxx) via UDPv4
15:38:38.536 -- Server poll timeout, trying next remote entry...
15:38:38.537 -- EVENT: RECONNECTING
15:38:38.542 -- EVENT: RESOLVE
15:38:38.570 -- Contacting 180.150.xx.xxx:1194 via UDP
15:38:38.571 -- EVENT: WAIT
15:38:38.587 -- Connecting to [xxxx.tplinkdns.com]:1194 (180.150.xx.xxx) via UDPv4
15:38:48.539 -- Server poll timeout, trying next remote entry...
15:38:48.540 -- EVENT: RECONNECTING
15:38:48.545 -- EVENT: RESOLVE
15:38:48.563 -- Contacting 180.150.xx.xxx:1194 via UDP
15:38:48.563 -- EVENT: WAIT
15:38:48.568 -- Connecting to [xxxx.tplinkdns.com]:1194 (180.150.xx.xxx) via UDPv4
15:38:58.541 -- Server poll timeout, trying next remote entry...
15:38:58.543 -- EVENT: RECONNECTING
15:38:58.547 -- EVENT: RESOLVE
15:38:58.575 -- Contacting 180.150.xx.xxx:1194 via UDP
15:38:58.576 -- EVENT: WAIT
15:38:58.587 -- Connecting to [xxxx.tplinkdns.com]:1194 (180.150.xx.xxx) via UDPv4
15:39:08.545 -- Server poll timeout, trying next remote entry...
15:39:08.547 -- EVENT: RECONNECTING
15:39:08.552 -- EVENT: RESOLVE
15:39:08.572 -- Contacting 180.150.xx.xxx:1194 via UDP
15:39:08.573 -- EVENT: WAIT
15:39:08.577 -- Connecting to [xxxx.tplinkdns.com]:1194 (180.150.xx.xxx) via UDPv4
15:39:18.535 -- EVENT: CONNECTION_TIMEOUT
15:39:18.546 -- EVENT: DISCONNECTED
15:39:18.547 -- Tunnel bytes per CPU second: 0
15:39:18.547 -- ----- OpenVPN Stop -----
Thanks
Igor
- Copy Link
- Report Inappropriate Content
Hi Igor,
Thanks for all the details. This case will be forwarded to our seniors who will contact you via email directly, please pay attention to your email box and get contact with him.
Good days.
- Copy Link
- Report Inappropriate Content
@bigor i have the same error, you can fixit??
⏎1/15/2021, 11:31:37 AM EVENT: WAIT ⏎1/15/2021, 11:31:37 AM Connecting to [xxxxx.tplinkdns.com]:1195 (xxx.109.52.53) via UDPv4
⏎1/15/2021, 11:31:47 AM Server poll timeout, trying next remote entry...
⏎1/15/2021, 11:31:47 AM EVENT: RECONNECTING ⏎1/15/2021, 11:31:47 AM EVENT: RESOLVE ⏎1/15/2021, 11:31:47 AM Contacting xxx.109.52.53:1195 via UDP
⏎1/15/2021, 11:31:47 AM WinCommandAgent: transmitting bypass route to xxx.109.52.53
{
"host" : "xxx.109.52.53",
"ipv6" : false
}
- Copy Link
- Report Inappropriate Content
My issue was that the ISP transferred me to a cgnat shared ip address.
In effect router was reporting a different public ip than what it was.
Tplink support was great and picked that up right away.
It was disappointing as I contacted my ISP prior asking if they changed something that stopped my vps working. Just shows the staff being employed at these places are not much more than call centre operators.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4384
Replies: 5
Voters 0
No one has voted for it yet.