Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > TL-WR841HP not working after firmware update

< Wi-Fi Routers

TL-WR841HP not working after firmware update

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WR841HP not working after firmware update

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

sadi_zaman

2020-05-27 09:14:20

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-05-27

TL-WR841HP not working after firmware update

2020-05-27 09:14:20

Model: TL-WR841HP

Hardware Version: V1

Firmware Version: TL-WR841HP_V1.20_150729

Hi. Last few days, my wifi router (TL-WR841HP v1.2) was disconnecting and reconnecting to all devices frequently. So I updated the firmware to latest version from tp link official site. After following the process of updating, my router stopped working. Now, all the lights are always on (not flashing, not bootloop) and no wifi or lan connection (pc says network cable unplugged even when the cable is connected). Didnt find anything on the internet like this problem. Can anyone please help?

2 Reply

Solla-topee

2020-05-29 05:57:37

Posts: 13654

Helpful: 2357

Solutions: 2035

Stories: 8

Registered: 2020-05-19

Re:TL-WR841HP not working after firmware update

2020-05-29 05:57:37

@sadi_zaman

Please verify the below info before we conclude the router is defective:

1. What is the hardware version of your WR841HP, check it on the bottom label, and which firmware did you upgrade to, show me the link please;

2. When you try to upgrade the router firmware, is there any power outage or restart?

3. If the upgrade process went smoothly but the router is still not functioning anymore even you try to hardware reset it, it might be faulty and you may contact your reseller to see if it is still in warranty.

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

sadi_zaman

LV1

2020-05-29 10:53:09 - last edited 2020-05-29 10:54:40

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-05-27

Re:TL-WR841HP not working after firmware update

2020-05-29 10:53:09 - last edited 2020-05-29 10:54:40

@Solla-topee

My hardware version is 1.2 and I downloaded this "https://static.tp-link.com/res/down/soft/TL-WR841HP_v1.20_150729.zip" from this site https://www.tp-link.com/bd/support/download/tl-wr841hp/v1.20/#Firmware . It even shows my hardware picture so there is no question of mistake.

My hardware was acting weird but it was at least working before the update. There were no power outage or restart. The update was smooth. After the update, I waited for more than 15 minutes before I checked the router that all the lights were on and its not starting. No LAN connection or WIFI signal.

I think my router is gone! Still I wanted to make sure if I can do anything to bring it back!

BTW, its a bit old router and its out of warranty period for a time now.

TL-WR841HP not working after firmware update

TL-WR841HP not working after firmware update

Information

Voters 0

Tags