WiFi speed capped at 10mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WiFi speed capped at 10mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WiFi speed capped at 10mbps
WiFi speed capped at 10mbps
2020-05-24 15:52:32 - last edited 2020-05-28 12:25:55
Model: Archer C6  
Hardware Version: V2
Firmware Version: 1.15 Build 20191112 rel.36515(5553)

Hey I just bought a new router and configured it! I checked the range out and it was amazing! but when I did a speedtest it maxed only upto 10mbps, whereas my internet plan is 75mbps. I did a lot of research in the gateway page and i came to know that it was becaus of the Duplex settings. it was set to automatic and I changed it to 100mbps full duplex. But even now the probllem isn't solved. When i check the internet logs. it shows that intenet is connected to 10mbps full duplex. Please Help!

 

Thank You

  0      
  0      
#1
Options
1 Accepted Solution
Re:WiFi speed capped at 10mbps-Solution
2020-05-24 19:24:33 - last edited 2020-05-28 12:25:55

@Mansoor267 

 

The duplex set at automatic shouldn't need changing, the router can detect and adjust accordingly. Check the cable, make sure it's CAT5/6 and the RJ45 has all 8-wires/connectors. Possibly use a different cable. Review the QoS, see if the bandwidth for up/down is correct.

 

Below are links to the User Guide manual for more information.

 

https://www.tp-link.com/us/support/download/archer-c6/

https://static.tp-link.com/1910012217_Archer%20VR600(b)(EU)(AU)_V2_UG.pdf

 

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:WiFi speed capped at 10mbps-Solution
2020-05-24 19:24:33 - last edited 2020-05-28 12:25:55

@Mansoor267 

 

The duplex set at automatic shouldn't need changing, the router can detect and adjust accordingly. Check the cable, make sure it's CAT5/6 and the RJ45 has all 8-wires/connectors. Possibly use a different cable. Review the QoS, see if the bandwidth for up/down is correct.

 

Below are links to the User Guide manual for more information.

 

https://www.tp-link.com/us/support/download/archer-c6/

https://static.tp-link.com/1910012217_Archer%20VR600(b)(EU)(AU)_V2_UG.pdf

 

Recommended Solution
  0  
  0  
#2
Options