Home Network Community > Wi-Fi Routers > Wi-FI issues after firmware update (Archer C6, T4E)
< Wi-Fi Routers

Wi-FI issues after firmware update (Archer C6, T4E)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Wi-FI issues after firmware update (Archer C6, T4E)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wi-FI issues after firmware update (Archer C6, T4E)
Wi-FI issues after firmware update (Archer C6, T4E)
2020-04-27 20:50:40 - last edited 2020-04-28 16:09:38
Model: Archer C6  
Hardware Version: V2
Firmware Version: 1.3.0 Build 20200402 rel.52000(4555)

Hi everyone,

Two days ago, I've installed the new firmware version on my Archer C6, which introduce OneMesh feature. Since than, I have problems with my desktop, I'll trying to explain:

when I connect my PC on 5 GHz, I'm experiencing more latency and slower connection, resulting an increased ping and a really bad gaming experience; instead, with 2.4 GHz all seems fine as before. The strange thing is that the problem exists only on my desktop because the other devices don't show any issues. I think that the problem is connected to my Wi-Fi card, a TP-Link T4E, updated with latest driver available on the website.

Any solutions? Thanks

 

P.S. I've already tried to change Wi-Fi Settings (also txBF, and MIMO) , downgrade Windows and re-install drivers for TP-Link T4E. Nothing seems to work

  0      
 
  0      
 
#1
Options
19 Reply
Re:Wi-FI issues after firmware update (Archer C6, T4E)
2020-04-30 15:29:47

@Vale99 

Good afternoon.
I have the same problem.
I use the Archer T3U wireless adapter.
Since I updated the router, 5GHz Wifi is impossible to use.
  0  
  0  
#2
Options
Re:Wi-FI issues after firmware update (Archer C6, T4E)
2020-04-30 15:59:33

@AlexRR 

 

I sent an e-mail to technical support, then (as recommended) I tried to install a beta FW version, but the problem it's still here.

I invite you to send an email too for increase their attention.
 

  0  
  0  
#3
Options
Re:Wi-FI issues after firmware update (Archer C6, T4E)
2020-04-30 16:24:25

@Vale99 

 

Where did you get the beta version from? If I am already in contact with them via email, for the moment, without results.

  0  
  0  
#4
Options
Re:Wi-FI issues after firmware update (Archer C6, T4E)
2020-04-30 17:16:20 - last edited 2020-05-04 22:08:38

@AlexRR 

 

They sent me a link

As I said before I've already try it, but the problems remain.

  0  
  0  
#5
Options
Re:Wi-FI issues after firmware update (Archer C6, T4E)
2020-04-30 20:48:38 - last edited 2020-04-30 21:03:36

@Vale99 Just try tu use this settings. And "TxBF, MU-MIMO" put to ENABLE.

 

  0  
  0  
#6
Options
Re:Wi-FI issues after firmware update (Archer C6, T4E)
2020-04-30 22:44:26

@2MEX2 

 

I've already tried this solution: for a strange reason it works apparently fine for some minutes, then the connection continues to give problems. Below an example of speed test on 5 GHz. It starts normally around 82-83 Mb/s in download, then it drops (also in upload, where it's normally around 20 MB/s).

  0  
  0  
#9
Options
Re:Wi-FI issues after firmware update (Archer C6, T4E)
2020-05-01 16:53:29

I got a problem with C6 & T4U (hi ping, lost packet), my technical support (Poland) give me this driver and work's work me.

https://static.tp-link.com/2019/201911/20191128/Archer T3U_beta_U2_U3_5G unstable issue_1030.22.0202.2018.zip

  0  
  0  
#10
Options
Re:Wi-FI issues after firmware update (Archer C6, T4E)
2020-05-01 17:16:19 - last edited 2020-05-01 17:25:17

@Kreco 

 

That driver it's specific for usb adapters, so I don't think it will work for me. Anyway your experience makes me believe that the problem is in the Wi-Fi card.

  0  
  0  
#11
Options
Re:Wi-FI issues after firmware update (Archer C6, T4E)
2020-05-01 18:48:13

@ Vale99 

Hi.
As I mentioned, I have the same problem with the WIFI connection.
It is not the wireless adapter, at least in my case.
I have the Archer C6 configured in router mode and the WIFI connection fails me.
I remove the Archer C6 and configure the router of my ISP and the WIFI works perfectly. I haven't touched the adapter drivers at all.
The adapter is an Archer T3U. I have tested the drivers that Creco has passed and it is better, but I keep losing packages.
  0  
  0  
#12
Options
Re:Wi-FI issues after firmware update (Archer C6, T4E)
2020-05-01 19:02:31

@AlexRR 

 

Of course, for me the question is just an hypothesis.Currently I'm waiting for news from technical support

  0  
  0  
#13
Options
12

Information

Helpful: 0

Views: 6690

Replies: 19

Related Articles
Issue with Wifi Coverage for Archer C6 after recent firmware update.
2013 0
Archer c6 can't login after firmware update
1967 0
Cannot connect to Archer C6 after firmware update
1368 0
Archer C6 V2.0 2.4Ghz Wi-Fi problems after latest firmware update
2419 1
Archer C6 EU OneMesh update
26165 2
Archer C6 no wifi/ehternet
692 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.