Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > M9 and M5 disconnects

< Deco

M9 and M5 disconnects

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

M9 and M5 disconnects

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Iconic

2020-04-14 14:08:13 - last edited 2020-04-14 14:09:16

Posts: 20

Helpful: 10

Solutions: 1

Stories: 0

Registered: 2019-04-09

M9 and M5 disconnects

2020-04-14 14:08:13 - last edited 2020-04-14 14:09:16

Model: Deco M9 Plus

Hardware Version: V1

Firmware Version:

I have a m9 plus as my main hub and another m9 slave which works perfectly.

I have 3 m5 slaves which since the 1.4 update disconnect at random when there is any load on the network/device.

I experienced similar issues about a year ago when the m5s updated and the m9s did not.

Is there another issue in a hybrid environment? Or do I dump the deco system and find something else?

2 Reply

David-TP

2020-04-26 09:33:58

Posts: 12443

Helpful: 1719

Solutions: 1199

Stories: 9

Registered: 2020-04-14

Re:M9 and M5 disconnects

2020-04-26 09:33:58

@Iconic

In your case, please help to confirm the following information.

1. What's the firmware and hardware of the three Deco M5? What's the firmware of the two Deco M9 Plus now?

2. When the disconnect problem occurs, how about the LED status on the Deco M5? Is the LED solid green or red?

3. How about your network diagram? Which Deco is connected to which, by wired or wireless? And how about the signal strength between Deco units?

4. Is the problem happens on a specific Deco or a specific client?

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.

Iconic

LV1

2020-04-26 17:46:19

Posts: 20

Helpful: 10

Solutions: 1

Stories: 0

Registered: 2019-04-09

Re:M9 and M5 disconnects

2020-04-26 17:46:19

Hi, All are V1 M5's (1.3.0 Build 20190821 Rel. 54023), as are the M9's (1.3.0 Build 20190821 Rel. 54023) The 2 M9 Plus have a wired connection (Hall + Living Room). One of the M5's (Office) is wired to the main M9, and the other 2 connect via Wifi (Bedroom and Kitchen) It is an issue with all devices on the M5's. When it happens, the light goes red on the M5, but the M9's work fine. I've decommissioned the M5's and thing work perfectly, except I have no wifi in the Office.

M9 and M5 disconnects

M9 and M5 disconnects

Information

Voters 0

Tags