@Blanc Yes, a lot of bugs for a very expensive router. I have to rely on beta firmwares than stable firmwares to get it working with less problems

Blanc wrote

Hello there TP-link Community.

 

I got a few problems with my Archer AX6000

 

Note: i tested the same results on all devices in my house. (smart tv's, ios, android. etc.)
I got a 350 up and down fiber bundle.

 

- Sometimes very slow wifi speeds (250kb up/down) I tested this with my fiber modem and got normal speeds

- Connected but no WIFI

- Can't connect at all to my WIFI network

- Some devices randomly dissconect from WIFI, and it's hard to reconnect sometimes they even wont reconnect.

- Wifi network dissapears for awhile. (5/10min)

- Function 'Smart Connect' does not work, does not switch to 2.4hz when futher away, just disconnects. (when making a guest WIFI network on 2.4hz i get better range)

 

I also tried a old modem router from our previous ISP and got no problems (range was not great)

 

I would love to keep this router but all these problems are getting annoying.

 

Greetings Blanc.

 

.

You should read and follow this posts https://community.tp-link.com/en/home/forum/topic/175434?page=1

@Kevin_Z 

Hi kevin, thank u for replying.
 

On my second point i meant i am connected but i got no internet, my note 9 says someting like: ''connected but no internet''

Firmwareversion: 1.0.7 Build 20200212 rel.7095.

I will try out the beta version.

Thank you,

Blanc

@TadBR 

Worked really nice out of the box, but after updates WIFI got really bad.

@Blanc 

please try this beta FW. I got from the other forum. It's saided to help.

https://static.tp-link.com/2020/202003/20200323/ax6000v1_us-up-ver1-0-8-P8[20200320-rel4754]_2020-03-21_14.44.24.zip

Please let me know if it helps.

@matthew.mfden 

Hi Matthew, I see you advice me to download a version 1.0.8 whilst @Kevin_Z advised me to download a 1.0.7. The 1.0.8 is the current one is suppose?

Thank you.

@Blanc

I am not aware that you already got a beta FW from TP-Link representative. 

As I said, I found this beta from other forum. I cannnot post the URL because the system block this behavior. You had better to use beta you got from TP-Link representative I think. 

@matthew.mfden i have been experiencing a lot of problems with that firmware. There is no stable firmware for this router be it beta o officially published.

For example, i cannot get a wired connection, QoS is broken, wifi signal is flimsy. I had to restart the router several times.

@TadBR I am using the 1.07 beta for now. I have had no problems for about a week since I installed. Much better than before when 5g would flake out. Seems the Wi-Fi signal is also a little stronger.