Regular Ping/Lag Spikes on Deco M9
I'm having an issue of a perfectly regular ping spike when using the Deco M9.
The chart below shows a ping to the main Deco. You can see the perfectly regular ping spikes. This is just a local ping as you can see from the IPs, it has nothing to do with my internet connection, which is a stable 350mbs. So we can discount that.
Other points which may help diagnose:
- The speed I achieve is good. (from the laptop that created the screenshot below - which I imagine is connected to the satellite)
- Both Decos lights are green. And a distance of about 7m between the master and the only satellite.
- Latest Firmware
- Anti Virus is turned off and QOS isn't weighted at all, all I've done is set the conncetion speed via the speed test as without that there was some noticeable throttling.
- Have tried factory resetting and swapping the 2 Deco master around. Still same issue.
- Deco in Router mode
- Internet (Router in modem mode) --> Master Deco --> 5 port Netgear Switch with a few devices
This lag spike occurs every 50s or so, makes gaming impossible, and is a serious regression in performance over my non mesh network.
Please advise what might be the source, or if there's anyhting else I can do to diagnose.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@oller Wow, thanks. I have been having these ping spikes too, perfectly periodic, about every 6-10s. Small, regular
I experienced this on my Macbook pro 2022 and my intel imac 2021. So far as i know, neither of these devices use realtek wifi chips (pretty sure they use TSMC).
Anyway, **disabling the Mesh did _not_ fix it**. However, **disabling the 2.4 Gz range signal _does_ appear to have resolved it**.
My setup:
3x deco x60. latest firmware.
main deco *not* in router mode (LAN cable to ISP-provided router)
Previously: both 2.4Ghz and 5GHz on same SSID
Now: Just 5Gz signal.
What's worse is that ping from the imac _to_ the macbook was off the charts (range of 15ms to 4s, mostly > 500ms). This made no sense as the devices are literally next to each other, albeit connected to different decos for _hand wavy_ reasons explicable only by Apple's wifi driver author. After disabling the 2.4Gz range, ping to the other LAN device is _better_ but still extremely variable. This seems odd to me, as ping to 8.8.8.8 is stable.
Example:
ben@BeniMac2020 ycmd % ping benmbp2021.local
PING benmbp2021.local (192.168.0.64): 56 data bytes
64 bytes from 192.168.0.64: icmp_seq=0 ttl=64 time=71.331 ms
64 bytes from 192.168.0.64: icmp_seq=1 ttl=64 time=93.056 ms
64 bytes from 192.168.0.64: icmp_seq=2 ttl=64 time=118.280 ms
64 bytes from 192.168.0.64: icmp_seq=3 ttl=64 time=37.671 ms
64 bytes from 192.168.0.64: icmp_seq=4 ttl=64 time=61.346 ms
64 bytes from 192.168.0.64: icmp_seq=5 ttl=64 time=81.788 ms
64 bytes from 192.168.0.64: icmp_seq=6 ttl=64 time=104.145 ms
64 bytes from 192.168.0.64: icmp_seq=7 ttl=64 time=23.548 ms
64 bytes from 192.168.0.64: icmp_seq=8 ttl=64 time=38.110 ms
64 bytes from 192.168.0.64: icmp_seq=9 ttl=64 time=59.732 ms
64 bytes from 192.168.0.64: icmp_seq=10 ttl=64 time=79.960 ms
^C
--- benmbp2021.local ping statistics ---
12 packets transmitted, 11 packets received, 8.3% packet loss
round-trip min/avg/max/stddev = 23.548/69.906/118.280/28.072 ms
ben@BeniMac2020 ycmd % ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: icmp_seq=0 ttl=57 time=19.451 ms
64 bytes from 8.8.8.8: icmp_seq=1 ttl=57 time=19.485 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=57 time=16.321 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=57 time=15.940 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=57 time=16.017 ms
64 bytes from 8.8.8.8: icmp_seq=5 ttl=57 time=15.987 ms
64 bytes from 8.8.8.8: icmp_seq=6 ttl=57 time=16.440 ms
64 bytes from 8.8.8.8: icmp_seq=7 ttl=57 time=17.214 ms
^C
- Copy Link
- Report Inappropriate Content
*sigh*, spent like 1-2 month investigating why my deco were performing way more terrible after we moved to this new house, just to realized we've switched from using ethernet backhaul from every deco to only using wireless connectivity between the decos, Thanks to this one person on reddit for mentioning it
https://www.reddit.com/r/HomeNetworking/comments/ge7cq2/comment/fplw4im/?utm_source=share&utm_medium=web2x&context=3
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 24344
Replies: 32