Home Network Community > Deco > AC2200 Deco M9 Plus ping spikes
< Deco

AC2200 Deco M9 Plus ping spikes

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AC2200 Deco M9 Plus ping spikes

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AC2200 Deco M9 Plus ping spikes
AC2200 Deco M9 Plus ping spikes
2020-03-28 20:41:35 - last edited 2020-03-31 09:56:57
Model: Deco M9 Plus  
Hardware Version: V1
Firmware Version: 1.2.11 Build 20190926 Rel. 55727

So i ordered the Deco M9 Plus ( set of 3 ) yesterday, got it today. Hooked it up and noticed a nice fast network. However..

 

There are ping spikes round about every 10 seconds. I am sure this has to do with the M9 wifi, because when i connect my Desktop to the nearest Deco by UTP cable i have a perfect connection.

 

My setup is also very simple :

- I have a 1000/1000Mbps fiber connection in my Genexis Platinum-7840. Wifi is disabled on that router.

- I have 3 Deco M9 Plus. The 1st one is connected by UTP to the Genexis. The 2nd and 3rd are added by using the app. All of them about 5 - 8 meters apart.

 

Also between my Desktop and the 1st deco there is about 4 meters with a plasterboard wall in between, so that can't be an issue either.

 

Here is a screenshot when i'm connected to the Deco WiFi. Very obvious spikes.

 

 

And after this, i connected my desktop wired to the Deco. Extremely stable connection

 

 

My IP / gateway : 

 

 

It seems to me that this proves there is no problem with my internet connection. 

Also it proves that the problem is caused by the WiFi of the M9, since the wired connection to the M9 works perfectly.

 

I'd like some help, since i ordered this because of the many good reviews and it now turns out i should have read more. Because after googling this issue i found many topics that are describing this problem. 

 

I'm disappointed by this. I don't want to spend my friday evening writing topics about ping spikes. I expect hardware i paid a BUNCH of money for to work properly.

 

 

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:AC2200 Deco M9 Plus ping spikes-Solution
2020-03-29 09:19:34 - last edited 2020-03-31 09:56:57

Figured it out.

 

If anyone else is having this issue it is because your WiFi network card in your desktop automatically keeps looking for the best WiFi network. In many cases ( like in mine ) the quality of the different Deco's ( best reception ) is similar, which will cause your WiFi network card to switch every time.

 

Fix 1 : There is one way you can fix this in windows :

 

In your windows cmd, type in

netsh wlan show settings

and one of the last things might say

Auto configuration logic is enabled on interface "Wireless Network Connection"

if that's the case, then type in

netsh wlan set autoconfig enabled=no interface="Wireless Network Connection"

It should respond with

Auto configuration has been disabled on interface "Wireless Network Connection".

If it doesn't, then you might have mistyped your interface=" part. Check in your adapter settings, you might have Wireless Network Connection 2 or 3 etc.

This will definitely stop your wireless card from searching for nearby networks and updating your signal quality when you're not asking it to- which is what is causing the spikes.

You will need to turn it back on if you disconnect or need to be able to find nearby networks again. 

 

Fix 2 : The other obvious solution is to make sure that your desktop always has 1 Deco that gives it the best network, so either place it closer to your desktop. Or place the other Deco it switches to further away.

 

Hope this helps people with the same problem. 

 

 

Recommended Solution
  0  
  0  
#2
Options
6 Reply
Re:AC2200 Deco M9 Plus ping spikes-Solution
2020-03-29 09:19:34 - last edited 2020-03-31 09:56:57

Figured it out.

 

If anyone else is having this issue it is because your WiFi network card in your desktop automatically keeps looking for the best WiFi network. In many cases ( like in mine ) the quality of the different Deco's ( best reception ) is similar, which will cause your WiFi network card to switch every time.

 

Fix 1 : There is one way you can fix this in windows :

 

In your windows cmd, type in

netsh wlan show settings

and one of the last things might say

Auto configuration logic is enabled on interface "Wireless Network Connection"

if that's the case, then type in

netsh wlan set autoconfig enabled=no interface="Wireless Network Connection"

It should respond with

Auto configuration has been disabled on interface "Wireless Network Connection".

If it doesn't, then you might have mistyped your interface=" part. Check in your adapter settings, you might have Wireless Network Connection 2 or 3 etc.

This will definitely stop your wireless card from searching for nearby networks and updating your signal quality when you're not asking it to- which is what is causing the spikes.

You will need to turn it back on if you disconnect or need to be able to find nearby networks again. 

 

Fix 2 : The other obvious solution is to make sure that your desktop always has 1 Deco that gives it the best network, so either place it closer to your desktop. Or place the other Deco it switches to further away.

 

Hope this helps people with the same problem. 

 

 

Recommended Solution
  0  
  0  
#2
Options
Re:AC2200 Deco M9 Plus ping spikes
2020-03-31 09:56:05 - last edited 2020-03-31 09:56:57

@MartinNotHappy 

 

Thanks for your update, glad to hear that you figured it out. 

 

Now you can enjoy the internet with the Deco M9 plus. 

 

Thanks for sharing it again. Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#3
Options
Re:AC2200 Deco M9 Plus ping spikes
2020-03-31 10:30:02

Hi all,

 

I also have this problem with my laptop. If iconnect to a M9 i get this

 

Reply from 192.168.1.1: bytes=32 time=5ms TTL=64
Reply from 192.168.1.1: bytes=32 time=4ms TTL=64
Reply from 192.168.1.1: bytes=32 time=4ms TTL=64
Reply from 192.168.1.1: bytes=32 time=2952ms TTL=64
Reply from 192.168.1.1: bytes=32 time=4ms TTL=64
Reply from 192.168.1.1: bytes=32 time=4ms TTL=64
Reply from 192.168.1.1: bytes=32 time=4ms TTL=64
Reply from 192.168.1.1: bytes=32 time=4ms TTL=64
Reply from 192.168.1.1: bytes=32 time=3ms TTL=64
Reply from 192.168.1.1: bytes=32 time=6ms TTL=64
Reply from 192.168.1.1: bytes=32 time=73ms TTL=64
Reply from 192.168.1.1: bytes=32 time=5ms TTL=64
Reply from 192.168.1.1: bytes=32 time=51ms TTL=64
Reply from 192.168.1.1: bytes=32 time=79ms TTL=64
Reply from 192.168.1.1: bytes=32 time=18ms TTL=64
Reply from 192.168.1.1: bytes=32 time=8ms TTL=64
Reply from 192.168.1.1: bytes=32 time=2940ms TTL=64
Reply from 192.168.1.1: bytes=32 time=6ms TTL=64
Reply from 192.168.1.1: bytes=32 time=5ms TTL=64
Reply from 192.168.1.1: bytes=32 time=3ms TTL=64
Reply from 192.168.1.1: bytes=32 time=6ms TTL=64
Reply from 192.168.1.1: bytes=32 time=4ms TTL=64
Reply from 192.168.1.1: bytes=32 time=9ms TTL=64
Reply from 192.168.1.1: bytes=32 time=3ms TTL=64

 

I see these spikes every 8 to 12 seconds. my whole internetconnection freezes.

 

If i connect through cable or an other router i dont have this problem.

So i wonder if this is a problem of the M9. i have the version 2 and i downloaded the firmware 1.2.13, but it did not help. 

My wifi is useless right now on my laptop. I took a long cable and plugged it in to properly work.

 

I hope someone has the same issues as i do and have a solution for me.

I also checked the internet and saw some similar issues but nothing worked

I also tried to connect through an usb wifi adapter, but still the same

 

I have 2 questions:

 

Is this a problem of windows 10 or

Is there still something not correct in the TP-link m9 V2?

 

please help,

 

Dave

  0  
  0  
#4
Options
Re:AC2200 Deco M9 Plus ping spikes
2020-04-08 08:14:37 - last edited 2020-04-08 08:16:32

I also posted this in a M5 thread.

 

 

Same problem here:


(this was taken just now, via wifi laptop -> Deco - wifi backhail - > Deco - cat6 wired ethernet backhaul - Deco -> ISP CPE.)

 

boy@MacBook-Pro-van-Boy ~ % traceroute 8.8.8.8

traceroute to 8.8.8.8 (8.8.8.8), 64 hops max, 52 byte packets

 1  192.168.1.1 (192.168.1.1)  6.013 ms  4.264 ms  4.479 ms = Main Deco

 2  192.168.0.1 (192.168.0.1)  7.211 ms  8.245 ms  6.910 ms = ISP CPE

^C

boy@MacBook-Pro-van-Boy ~ % ping 192.168.0.1

PING 192.168.0.1 (192.168.0.1): 56 data bytes

64 bytes from 192.168.0.1: icmp_seq=0 ttl=63 time=10.095 ms

64 bytes from 192.168.0.1: icmp_seq=1 ttl=63 time=8.654 ms

64 bytes from 192.168.0.1: icmp_seq=2 ttl=63 time=7.795 ms

64 bytes from 192.168.0.1: icmp_seq=3 ttl=63 time=6.776 ms

64 bytes from 192.168.0.1: icmp_seq=4 ttl=63 time=9.152 ms

64 bytes from 192.168.0.1: icmp_seq=5 ttl=63 time=9.010 ms

64 bytes from 192.168.0.1: icmp_seq=6 ttl=63 time=6.170 ms

64 bytes from 192.168.0.1: icmp_seq=7 ttl=63 time=6.446 ms

64 bytes from 192.168.0.1: icmp_seq=8 ttl=63 time=135.253 ms

64 bytes from 192.168.0.1: icmp_seq=9 ttl=63 time=6.673 ms

64 bytes from 192.168.0.1: icmp_seq=10 ttl=63 time=90.121 ms

64 bytes from 192.168.0.1: icmp_seq=11 ttl=63 time=111.301 ms

64 bytes from 192.168.0.1: icmp_seq=12 ttl=63 time=9.261 ms

64 bytes from 192.168.0.1: icmp_seq=13 ttl=63 time=7.039 ms

64 bytes from 192.168.0.1: icmp_seq=14 ttl=63 time=8.479 ms

64 bytes from 192.168.0.1: icmp_seq=15 ttl=63 time=7.844 ms

64 bytes from 192.168.0.1: icmp_seq=16 ttl=63 time=9.302 ms

^C

--- 192.168.0.1 ping statistics ---

17 packets transmitted, 17 packets received, 0.0% packet loss

round-trip min/avg/max/stddev = 6.170/26.434/135.253/40.477 ms

 

boy@MacBook-Pro-van-Boy ~ % ping 192.168.1.1

PING 192.168.1.1 (192.168.1.1): 56 data bytes

64 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=6.665 ms

64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=8.318 ms

64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=6.501 ms

64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=3.777 ms

64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=5.159 ms

64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=5.664 ms

64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=8.416 ms

64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=4.803 ms

64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=5.318 ms

64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=4.693 ms

64 bytes from 192.168.1.1: icmp_seq=10 ttl=64 time=5.767 ms

64 bytes from 192.168.1.1: icmp_seq=11 ttl=64 time=5.250 ms

64 bytes from 192.168.1.1: icmp_seq=12 ttl=64 time=5.186 ms

64 bytes from 192.168.1.1: icmp_seq=13 ttl=64 time=4.729 ms

64 bytes from 192.168.1.1: icmp_seq=14 ttl=64 time=5.287 ms

64 bytes from 192.168.1.1: icmp_seq=15 ttl=64 time=4.275 ms

64 bytes from 192.168.1.1: icmp_seq=16 ttl=64 time=3.951 ms

64 bytes from 192.168.1.1: icmp_seq=17 ttl=64 time=3.908 ms

64 bytes from 192.168.1.1: icmp_seq=18 ttl=64 time=4.506 ms

64 bytes from 192.168.1.1: icmp_seq=19 ttl=64 time=5.909 ms

64 bytes from 192.168.1.1: icmp_seq=20 ttl=64 time=5.550 ms

64 bytes from 192.168.1.1: icmp_seq=21 ttl=64 time=4.330 ms

64 bytes from 192.168.1.1: icmp_seq=22 ttl=64 time=7.638 ms

64 bytes from 192.168.1.1: icmp_seq=23 ttl=64 time=5.306 ms

64 bytes from 192.168.1.1: icmp_seq=24 ttl=64 time=6.732 ms

64 bytes from 192.168.1.1: icmp_seq=25 ttl=64 time=6.277 ms

64 bytes from 192.168.1.1: icmp_seq=26 ttl=64 time=5.892 ms

64 bytes from 192.168.1.1: icmp_seq=27 ttl=64 time=11.413 ms

64 bytes from 192.168.1.1: icmp_seq=28 ttl=64 time=5.890 ms

64 bytes from 192.168.1.1: icmp_seq=29 ttl=64 time=5.316 ms

64 bytes from 192.168.1.1: icmp_seq=30 ttl=64 time=7.689 ms

64 bytes from 192.168.1.1: icmp_seq=31 ttl=64 time=5.831 ms

64 bytes from 192.168.1.1: icmp_seq=32 ttl=64 time=6.574 ms

64 bytes from 192.168.1.1: icmp_seq=33 ttl=64 time=3.502 ms

64 bytes from 192.168.1.1: icmp_seq=34 ttl=64 time=7.333 ms

64 bytes from 192.168.1.1: icmp_seq=35 ttl=64 time=4.848 ms

64 bytes from 192.168.1.1: icmp_seq=36 ttl=64 time=3.888 ms

64 bytes from 192.168.1.1: icmp_seq=37 ttl=64 time=120.325 ms

64 bytes from 192.168.1.1: icmp_seq=38 ttl=64 time=124.846 ms

64 bytes from 192.168.1.1: icmp_seq=39 ttl=64 time=5.582 ms

64 bytes from 192.168.1.1: icmp_seq=40 ttl=64 time=76.638 ms

64 bytes from 192.168.1.1: icmp_seq=41 ttl=64 time=5.926 ms

64 bytes from 192.168.1.1: icmp_seq=42 ttl=64 time=4.720 ms

^C

--- 192.168.1.1 ping statistics ---

43 packets transmitted, 43 packets received, 0.0% packet loss

round-trip min/avg/max/stddev = 3.502/12.794/124.846/26.542 ms


Constantly random spikes to 150+ ms with no other big bandwidth consumers in the network.

Even when connecting a super short cable directly to the main deco gives me this problem but like 10 ms less only... still horrible. (not above ping test)

It's almost like the WiFi is fine...but the (main) deco takes too long to proces the packets every now and then.

 


 

192.168.1.1 = ISP CPE
192.168.0.1 = Deco M9 Plus
Back to back connected.

 

  0  
  0  
#5
Options
Re:AC2200 Deco M9 Plus ping spikes
2020-09-14 13:47:17

@Kevin_Z I have the same problem but with my X60 deco, can someone help me, should I Do the same commands?

  0  
  0  
#6
Options
Re:AC2200 Deco M9 Plus ping spikes
2021-02-11 03:20:22

Posted in the M5 topic, but I have the same issue with my M9 Plus v2 ... very frustrating!

 

https://community.tp-link.com/en/home/forum/topic/171562?replyId=561712

  0  
  0  
#7
Options

Information

Helpful: 1

Views: 3044

Replies: 6

Related Articles
Regular Ping/Lag Spikes on Deco M9
24952 1
Mesh TP-LINK Deco M9 Plus (AC2200 - 400 + 867 + 867 Mbps) Setup
1056 0
 Deco M9 plus periodical ping spikes every 10 seconds
1109 0
 DECO SMART HOME M9 PLUS AC2200 : Constantly one of the Deco blinking RED
543 0
Questions about Deco M9 Plus
936 0
Deco M9 Plus V2
1373 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.