X60 (hotspot mode) very unstable
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I recently bought a X60 set and the total solution is very unrialable
I recently bought a X60 set and the total solution is very unreliable. I did manage to setup the network and I am able to connect devices. Are a while the network is gone. When I checked the x60 devices the leds were flashing red and turned green again after a while. Any idea what the problem could be? There is no (readable) logging available so I don’t have a clue how to debug the situation.
I have 3 x60s and they are connected to my router in access point mode.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
How long have you had the devices and when did this issue start?
Could you please help me draw a picture of the network structure between the Decos and please also mark out the distance;
Would they turn green automatically after several minutes？
Could you please help me check the signal source on the two satellite Decos?—if possible, can I have some pictures of that?
Thank you very much and wait for your reply.
- Copy Link
- Report Inappropriate Content
I found your thread because I'm having the same problem. I have a 1gig fibre connection and some days I'm getting 600mbps speeds on wifi, most days it seems like I'm capped at 50mbps. I now have the deco's set to "Access point" mode, but the old wifi6 network still appears once in awhile and my devices all flip-flop between that network and my old router network. Long story short, these have been nothing but a problem, speeds are all across the map and I'm getting ready to send them back to Amazon for something more reliable.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4969
Replies: 32
Voters 0
No one has voted for it yet.