Home Network Community > Wi-Fi Routers > IP cams can no longer connect after Archer C5400x firmware upgrade
< Wi-Fi Routers

IP cams can no longer connect after Archer C5400x firmware upgrade

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

IP cams can no longer connect after Archer C5400x firmware upgrade

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
IP cams can no longer connect after Archer C5400x firmware upgrade
IP cams can no longer connect after Archer C5400x firmware upgrade
2020-03-12 13:20:48
Model: Archer C5400X  
Hardware Version: V1
Firmware Version: 1.1.2 Build 20191223 rel.73956(5553)

Recd router 3 days ago, finished change-over from old router yesterday. Mid size home network: 5 wired computers and 2 NASs, 9 IP cam, 3 phones, 2,tablets, a MFC. When I performed the firmware upgrade to 1.1.2 Build 20191223 rel.73956(5553) all 9 my of my wireless D-link IPcams (various DCS-93xL models) disconnected and cannot reconnect.

It is as if the router decided to block all the cameras. If i cant get this working again, I shall return router and drop in the old one.

  0      
 
  0      
 
#1
Options
3 Reply
Re:IP cams can no longer connect after Archer C5400x firmware upgrade
2020-03-12 16:54:29 - last edited 2020-03-12 17:05:39

@Genesis.Phrozen 

Update: i rolled back the firmware to the original version. which I assume was 'Archer C5400X(EU JP US)_V1_180904.bin from your support site.  I power cycled all the IP cams and they connected.. AFter about 3-4 mins they all 9 disconected and since then they have not been all connected at same time..

Is this problem a known bug?

  0  
  0  
#2
Options
Re:IP cams can no longer connect after Archer C5400x firmware upgrade
2020-03-16 09:06:25

@Genesis.Phrozen 

 

Hi, I don't think it is a bug; even though the IP cams disconnected from the Archer C5400X after firmware upgrade, while other wireless devices still worked well. 

 

If it is okay for you to reinstall the latest firmware, we can do some troubleshooting and try to figure it out. 

1. Update the firmware and verify whether you can reconnect the IP cams to it. Try to reboot them first. 

2. You can forget the network profile on IP cam and reconnect to it.

3. Or you can change the wireless settings to give it a go, like wireless channel, wireless network name and password. 

4. Besides, you can reset the camera and reconnect it.

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#3
Options
Re:IP cams can no longer connect after Archer C5400x firmware upgrade
2020-03-21 22:07:57 - last edited 2020-03-21 22:09:48

@Genesis.Phrozen 

2.4ghz wireless has now failed completely. It sometimes turns on for a min. or two.  Tech support chat was unable to resolve problem. Seems like the 2.4 radio may have failed.

All your suggestions align with the trouble-shooting I did.

 

I have an Issue number to use when I am able to do a factory reset. Because of corona work at home directives I can't do that while my wife is doing tech support online/on call. Since we do need printer and cams running, I have had to reconnect my older D-link Dir-885L to use as a wifi Extender to get 2.4ghz working..

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 901

Replies: 3

Related Articles
TP-Link Archer c5400x will NOT CONNECT WIRLESSLY AT ALL.
1126 0
Archer C5400X + OneMesh Extender
1549 0
 IP-Address Reservations - Archer C5400X
288 1
 Devices unable to connect to WiFi - Archer C5400x
164 0
Archer C5400x 802.3ad LACP WAN Aggregation
1040 0
Archer C5400X New Firmware 2021-2022
2472 4
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.